Page 6 / 99
Scroll up to view Page 1 - 5
T600N - Wireless Dual Band Gigabit Router
6
PRODUCT OVERVIEW
- T600N Wireless Dual Band Gigabit Router
- Power Adapter for T600N
- Optimal Designed 5dBi 2.4GHz High Gain Antenna
- Quick Installation Guide
- Resource CD: User Manual, Quick Installation Guide
- RJ45 Cables
Package Content:
Note:
- Please make sure that the package contains the above items. If any of the listed
items are damaged or missing, please contact with your distributor.
- Using a power supply with a different voltage rating than the one included with
the T600N may cause damage and void the warranty for this product.
Page 7 / 99
T600N - Wireless Dual Band Gigabit Router
7
LED Indicator
(From Left to Right)
•
WPS Button:
Push and hold for 3 seconds to enable WPS push
button configuration.
•
WPS:
Wi-Fi Protected Setup activity.
When the WPS mode is
activated the WPS LED blinks as it awaits a connection.
•
Power:
Indicates when the Router is powered on. The LED will
remain on.
•
2.4 GHz:
Blinks rapidly when the wireless data traffic is transmitted
or received over the 2.4GHz wireless network.
•
5GHz:
Blinks rapidly when wireless data traffic is transmitted or
received over the 5GHz wireless network.
•
Modem:
Indicates when modem is connected to the modem port
on the back of the Router.
The LED blinks rapidly when data is
transmitted or received.
•
LAN:
Indicates when a networking device is connected to a wired
port on the back of the Router.
The LED blinks rapidly when wired
data traffic is transmitted or received.
PRODUCT OVERVIEW
Page 8 / 99
T600N - Wireless Dual Band Gigabit Router
8
Back Panel Indicator
(From Left to Right)
•
DC-IN:
Power Adapter port. Output: 12V 1.25A, Input: 100-240v
•
LAN:
RJ-45 ports for connecting to wired computers or other network devices. (LAN 4~1 from
left to right)
•
Modem:
RJ-45 port for connecting to your Broadband Modem
•
RESET:
Push once to reboot the Router.
Hold down for 5-10 seconds to reset the Router back
to factory settings.
PRODUCT OVERVIEW
Page 9 / 99
T600N - Wireless Dual Band Gigabit Router
9
QUICK SETUP GUIDE
Connecting Guide
1. Disconnect and Unplug your Existing Router
•
Disconnect the RJ45 Cable in your existing router from your computer, broadband modem,
and the power adapter from the power outlet.
2. Power Off your Modem and Remove the Backup Battery if any
•
Remove the power adapter to power off your modem. Remove the modem’s backup
battery if your modem has one.
3. Connecting the T600N Wireless Router to your modem
•
Plugs one end of your Ethernet Cable to the modem and the other end to your T600N’s
“
modem
” port.
•
Since T600N supports Gigabit Network so it is recommended to use a
Cat 5 RJ45 Cable
to
fully utilize your T600N.
Page 10 / 99
T600N - Wireless Dual Band Gigabit Router
10
User Name:
admin
Password:
admin
QUICK SETUP GUIDE
Connecting Guide
4. Power on the Modem
•
Insert the backup battery
back to your modem, and plug back your modem’s power adapter.
•
Please wait 1~2 minutes the modem’s initialization to complete.
5. Power on your T600N Wireless Router and connect to your Computer
•
Connects one end of the Ethernet Cable to your T600N’s LAN port
•
Connects the other end of the Ethernet Cable to your Computer or Note book.
•
Plug in the power adapter of your T600N and power on your computer if it haven’t turn on.
6. Open your Web Browser and type in “
192.168.0.1
” in the address bar
•
When prompted, Enter the User Name and Password
19216811.live