1. Home
    2. /
  2. Manuals
    3. /
  3. Rosewill
    4. /
  4. T600N
    5. /
  5. 12
Page 56 / 99 Scroll up to view Page 51 - 55
T600N - Wireless Dual Band Gigabit Router
56
CONFIGURATION GUIDE
Wireless 5G
–
Basic
–
2
–
WDS
WDS:
Allows the wireless network to be expanded using multiple access points
without wired connections.
•
Radio:
Enable or disable the wireless radio. If the wireless radio is disabled,
there will not be any wireless signal.
•
Mode:
Select the wireless operating mode for the router. Two modes are
available: Access Point (
AP
) or Wireless Distribution System (
WDS
) mode.
•
WDS:
Allows the wireless network to be expanded using multiple
access points without wired connections.
•
Channel
Select a channel to assign to the wireless network. Valid
value are from one to eleven in the US and one to thirteen in the EU.
•
MAC Address [#]
Enter the MAC address(es) for the wireless access
point(s) that are part of the WDS.
•
WDS Data
Rate Select the data rate for the WDS.
•
Set Security
Click Set Security to display the WDS security settings
screen. For security configuration settings, refer to “WDS Security
Settings Screen” on
next page.
Note:
In order for WDS to work, there are some basic requirement:
1. Both AP needs to support WDS.
2. Both AP needs to have same SSID
3. Both AP needs to use same Channel.
4. When both AP set to WDS, they need to set each other’s MAC
addresses.
5. Both AP’s WDS encryption and password should be set the same.
Click
Apply
to save the settings or
Cancel
to discard the changes.
Page 57 / 99
T600N - Wireless Dual Band Gigabit Router
57
CONFIGURATION GUIDE
Wireless 5G
–
Basic
–
3
–
WDS Security
WDS:
Allows the wireless network to be expanded using multiple access points
without wired connections.
•
Set Security:
You should see a popup window when click on
Set Security
.
Please enter the same Encryption method and password of the device that
you want to connect to.
•
WDS:
Allows the wireless network to be expanded using multiple
access points without wired connections.
•
Channel
Select a channel to assign to the wireless network. Valid
value are from one to eleven in the US and one to thirteen in the EU.
•
MAC Address [#]
Enter the MAC address(es) for the wireless access
point(s) that are part of the WDS.
•
WDS Data
Rate Select the data rate for the WDS.
•
Set Security
Click Set Security to display the WDS security settings
screen. For security configuration settings, refer to “WDS Security
Settings Screen” on
next page.
Click
Apply
to save the settings or
Cancel
to discard the changes.
Page 58 / 99
T600N - Wireless Dual Band Gigabit Router
58
CONFIGURATION GUIDE
Wireless 5G
–
Advance
–
1
Advance:
Advanced settings available for the router.
•
Fragment Threshold:
Enter the maximum size of a packet during data
transmission. A value too low could lead to low performance.
•
RTS Threshold:
Enter the RTS threshold. If the packet size is smaller than the
RTS threshold, the T600N does not use RTS/CTS to send the data packet.
•
Beacon Interval:
Enter the beacon interval. This is the amount of time that
the T600N sets to synchronize the network.
•
Delivery Traffic Indication Message (DTIM) Period:
Enter the DTIM period.
The DTIM is a countdown period informing clients of the next point of
broadcast and multicast of messages over the network. Valid values are
between 1 and 255.
Note:
Incorrectly changing these settings may cause the device to stop
function. Please make sure you know the effect before changing the settings
Click
Apply
to save the settings or
Cancel
to discard the changes.
Page 59 / 99
T600N - Wireless Dual Band Gigabit Router
59
CONFIGURATION GUIDE
Wireless 5G
–
Advance
–
2
Advance:
Advanced settings available for the router.
•
N Data Rate:
Select the N data rate. This is the rate in which the T600N will
transmit data packets to wireless N compatible devices.
•
Channel Bandwidth:
Select the channel bandwidth. The factory default is
Auto 20/40MHz. The default setting provides the best performance by auto
selecting channel bandwidth.
•
Preamble Type:
Select the preamble type. Long Preamble provides better
LAN compatibility and Short Preamble provides better wireless performance.
•
CTS Protection:
Select the type of CTS protection. Using CTS Protection can
lower the data collisions between Wireless B and Wireless G devices and
lower data throughput.
•
Tx Power:
Select the wireless signal strength level. Valid values are between
10% and 100%.
Note:
Incorrectly changing these settings may cause the device to stop
function. Please make sure you know the effect before changing the settings
Click
Apply
to save the settings or
Cancel
to discard the changes.
Page 60 / 99
T600N - Wireless Dual Band Gigabit Router
60
CONFIGURATION GUIDE
Wireless 5G
–
Security
–
1
Security:
Enable security options on the wireless network to prevent unwanted
connection to the wireless network.
•
SSID Selection:
Select the wireless network group to change the wireless
security settings for..
•
Broadcast SSID:
Enable or disable broadcast SSID. Choose whether or not the
wireless group is visible to other members.
•
Wi-Fi Multimedia (WMM):
Enable or disable Multimedia quality of server
(QoS) to optimize the streaming for bandwidth sensitive data such as HDTV
video streaming, online gaming, VoIP, videoconferencing, and etc.
•
Encryption:
Select the encrypt type for the router. You can select between
WEP, WPA (WPA TKIP/ WPA2 AES / WPA2 Mix), Pre-Shared Key, WPA Radius.
Please see next page for details on Encryption.
Click
Apply
to save the settings or
Cancel
to discard the changes.

Rate

3.5 / 5 based on 2 votes.

Popular Rosewill Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top