Page 86 / 99
Scroll up to view Page 81 - 85
T600N - Wireless Dual Band Gigabit Router
86
CONFIGURATION GUIDE
Routing:
Typically static routing does not need to be setup because the T600N has
adequate routing information after it has been configured for Internet access. Static
routing is only necessary if the router is connected to network under a different
subnets.
•
NAT Disabled:
•
Enable Static Routing:
Click Enable Static Routing to activate the feature.
•
Destination LAN IP:
Enter the LAN IP address of the destination
device.
•
Subnet Mask:
Enter the Subnet Mask of the destination device.
•
Default Gateway:
Enter the default gateway IP address for the
destination device.
•
Hops:
Enter the maximum number of hops within the static
routing that a packet is allowed to travel.
•
Interface:
You can select LAN or WAN here.
Click
Apply
to save the settings or
Cancel
to discard the changes.
Advanced
–
Routing
Note:
To enable routing, you will first need to disable NAT.
Page 87 / 99
T600N - Wireless Dual Band Gigabit Router
87
CONFIGURATION GUIDE
Tools
Tools:
You can view and configure system and network tools settings:
•
Admin:
Configure the administrator password used to login to the router.
•
Time:
Configure the system time on the router.
•
DDNS:
Map a static domain name to a dynamic IP address.
•
Diagnosis:
Check if a specific computer is connected to the LAN.
•
Firmware:
Update the router’s firmware.
•
Backup / Factory Default:
Load or save configuration settings from a backup file or restore the
factory default settings.
•
Reset:
Manually reset the router.
Page 88 / 99
T600N - Wireless Dual Band Gigabit Router
88
CONFIGURATION GUIDE
Admin:
Change the router’s system password as well as setup a device to remotely
configure the settings.
•
Password Setting:
Here you can change the login password for T600N. (Default is:
Login: admin; pass: admin)
•
Old Password:
Enter the existing administrator password.
•
New Password:
Enter the new administrator password.
•
Repeat New Password:
Re-type the new administrator password.
•
Remote Management:
•
Host Address:
Enter the designated host IP Address.
•
Port:
Enter the port number (
Default: 8080
) for remote accessing
management web interface. (Unless behind a corporate firewall that
blocks some ports. Ports
80
and
443
are not typically blocked are for HTTP
and HTTPS outbound traffic.)
•
Enable:
Select to enable the Remote Management function.
Click
Apply
to save the settings or
Cancel
to discard the changes.
Tools
–
Admin
Note:
To access the settings of the T600N remotely, enter the router’s
WAN IP address and port number. E.g, if your external IP is 114.127.3.123
and you use port 8080, enter “
” You will still need
to enter Login name and password to enter the router’s management page.
Page 89 / 99
T600N - Wireless Dual Band Gigabit Router
89
CONFIGURATION GUIDE
Time:
Change the system time of the T600N and setup automatic updates through a
network time protocol server (NTP).
•
Time Setup:
Select how the router obtains the current time.
•
Time Zone:
Select the time zone for the router.
•
NTP Time Server:
Enter the domain name or IP address of an NTP server.
•
Enable Daylight Saving:
Click to enable or disable daylight savings time.
•
Start Time:
Select the date and time when daylights savings time starts.
•
End Time:
Select the date and time when daylights savings time ends.
Click
Apply
to save the settings or
Cancel
to discard the changes.
Tools
–
Time
Page 90 / 99
T600N - Wireless Dual Band Gigabit Router
90
CONFIGURATION GUIDE
DDNS:
Dynamic domain name service (DDNS) allows the administrator to map a
static domain name to a dynamic IP address. A DDNS service provider, such as
DynDNS, ZoneEdit or CyberGate, must provide an account, password, and static
domain name to use this feature. DDNS particularly benefits end users that have
their own websites or FTP sites.
•
Dynamic DNS:
Enable or Disable DDNS.
•
Server Address:
Select the DDNS Server Address.
•
Host Name:
Enter the DDNS provider static domain name.
•
Username:
Enter the username given by the DDNS provider.
•
Password:
Enter the password given by the DDNS provider.
Click
Apply
to save the settings or
Cancel
to discard the changes.
Tools
–
DDNS
19216811.live