Page 36 / 110
Scroll up to view Page 31 - 35
Wireless Router
RNX-EasyN4
User Manual
- Language
This Wireless Router support multiple language of web pages, You could select
your native language here.
Page 37 / 110
Wireless Router
RNX-EasyN4
User Manual
±
Wizard
Click
Wizard
to configure the Broadband Router. Setup wizard will now be displayed;
check that the modem is connected and click
<Next>.
The details please refer to
Smart Wizard.
Page 38 / 110
Wireless Router
RNX-EasyN4
User Manual
±
INTERNET
- Status
This page shows the current Internet connection type and status
- Dynamic IP
Use the MAC address when registering for Internet service, and do not change it
unless required by your ISP. If your ISP used the MAC address of the Ethernet card as
an identifier, connect only the PC with the registered MAC address to the broadband
router and click the
<Clone MAC Address>
button. This will replace the current MAC
address with the already registered Ethernet card MAC address
Page 39 / 110
Wireless Router
RNX-EasyN4
User Manual
Host Name:
This is optional.
MAC address:
The default value is set to the WAN’s physical interface of the
broadband router.
- Static IP
If your ISP Provider has assigned a fixed IP address, enter the assigned IP address,
Subnet mask, Default Gateway IP address, and Primary DNS of your ISP provider.
Page 40 / 110
Wireless Router
RNX-EasyN4
User Manual
- Point-to-Point over Ethernet Protocol (PPPoE)
19216811.live