Page 16 / 110
Scroll up to view Page 11 - 15
Wireless Router
RNX-EasyN4
User Manual
RNX-EASYN4
should be setup as depicted above.
Make sure your
DSL/CABLE modem
is setup and working. Else take the help of
your internet service provider.
Click
<Next>
to proceed.
Page 17 / 110
Wireless Router
RNX-EasyN4
User Manual
Check the MODEM and RNX-EASYN4 connection. It should be as shown below.
Check power connection for modem as well as RNX-EASYN4.
Make sure antenna is connected to rear panel of RNX-EASYN4.
Click
<Next>
to proceed.
Page 18 / 110
Wireless Router
RNX-EasyN4
User Manual
Notice the LED that should be light up at this stage. If not, check your procedures
again.
Click
<Next>
to configure WAN & Wireless settings.
Page 19 / 110
Wireless Router
RNX-EasyN4
User Manual
User name and password are
admin/admin.
Click
<OK>
. Your default browser
will connect to RNX-EASYN4 Web Server
.
Page 20 / 110
Wireless Router
RNX-EasyN4
User Manual
Click
<Next>
to enter mode selection.
Select the mode that RNX-EASYN4 is going to be and set its configurations.
AP Router
mode
does not enable WAN interface, Setup Wizard will skip WAN Configuration.
19216811.live