Rosewill RNX-EasyN4 Router Manual PDF (Setup & Configuration Guide)

Page 41 / 110 Scroll up to view Page 36 - 40

Wireless Router

RNX-EasyN4

User Manual

Login / Password:

Enter the PPPoE username and password assigned by your ISP

Provider.

Service Name:

This is normally optional.

Maximum Transmission Unit (MTU):

This is the maximum size of the packets.

Type:

Enable the Auto-reconnect option to automatically re-establish the connection

when an application attempts to access the Internet again.

Idle Timeout:

This is a maximum period of time for which the Internet connection is

maintained during inactivity. If the connection is inactive for longer than the

Maximum Idle Time, it will be dropped.

- Point-to-Point Tunneling Protocol (PPTP)

PPTP allows the secure connection over the Internet by simply dialing in a local

point provided by your ISP provider. The following screen allows client PCs to establish

a normal PPTP session and provides hassle-free configuration of the PPTP client on

each client PC.

Click

<Apply>

to save configuration and connect to ISP provider.

Page 42 / 110

Wireless Router

RNX-EasyN4

User Manual

±

Wireless Settings

- Basic

In basic setting page, you can set wireless Radio, Mode, Band, SSID, and

Channel.

Radio:

You can turn on/off wireless radio. If wireless Radio is off, you cannot

associate with AP through wireless.

Mode:

In this device, we support three operation modes which are

AP router

and

AP route with WDS

(we will introduce this function later section). If you

choose AP Router Mode, you can select AP or WDS function in the drop-

down menu.

Band:

You can select the wireless standards running on your network environment.

Page 43 / 110

Wireless Router

RNX-EasyN4

User Manual

2.4 GHz(B):

If all your clients are 802.11b, select this one.

2.4 GHz(N):

If all your clients are 802.11n, select this one.

2.4 GHz(B+G):

Either an 802.11b or an 802.11g wireless devices are in

your environment.

2.4 GHz(G):

If all your clients are 802.11g, select this one.

2.4 GHz(B+G+N):

Either 802.11b, 802.11g, or 802.11n wireless devices

are in your environment.

Enable ESSID:

We support 4 multiple SSIDs in this device. Please select how

many SSIDs you would like to use in your network environment.

ESSID1~4:

ESSID is the name of your wireless network. It might be a unique

name to identify this wireless device in the Wireless LAN. It is case

sensitive and up to 32 printable characters. You might change the

default ESSID for added security.

Auto Channel:

Device will search all valid channels, then decide a most clean

channel and change to this channel if you enable this function.

Depend on this function enable or not, you will see different item

below

Auto Channel

.

Channel:

If Auto Channel is disabled, you should choose a static channel and AP

will use this channel to communicate with other clients.

Check Channel Time:

If Auto Channel is enabled, you can choose a period from

the drop-down menu. AP will change to a clean channel

periodically.

Page 44 / 110

Wireless Router

RNX-EasyN4

User Manual

- WDS with AP Router

Wireless Distribution System, a system that enables the wireless interconnection

of access point, allows a wireless network to be expended using multiple access

points without a wired backbone to like them. Each WDS APs need setting as same

channel and encryption type.

MAC address 1~4:

Please enter the MAC address of the neighboring APs that

participates in WDS, we support 4 devices now.

Set Security:

WDS Security depends on your AP security settings. Note: it does

not support

mixed mode

such as WPA-PSK/WPA2-PSK Mixed

mode.

Page 45 / 110

Wireless Router

RNX-EasyN4

User Manual

- Advanced

This tab allows you to set the advanced wireless options. The options included are

Authentication Type, Fragment Threshold, RTS Threshold, Beacon Interval, and

Preamble Type. You should not change these parameters unless you know what

effect the changes will have on the router.

Fragment Threshold:

This specifies the maximum size of a packet during the

fragmentation of data to be transmitted. If you set this value

too low, it will result in bad performance.

RTS Threshold:

When the packet size is smaller than the RTS threshold, the

wireless router will not use the RTS/CTS mechanism to send this

packet.

Rate

Popular Rosewill Models

Famous Router IPs

Famous Router Companies

Bookmark Our Site

Share