Page 56 / 110
Scroll up to view Page 51 - 55
Wireless Router
RNX-EasyN4
User Manual
- Policy
The Broadband router can allow you to set up the Wireless Access Policy.
WAN Connection:
Allow Wireless Client on specific SSID to access WAN port.
Communication between Wireless clients:
Allow Wireless Client to communicate
with other Wireless Client on specific SSID.
Communication between Wireless clients and wired clients:
Allow Wireless Client
to communicate with other Wireless Client on specific SSID and Wired Client on the
switch. Or Wireless Client will allow to access WAN port only
Page 57 / 110
Wireless Router
RNX-EasyN4
User Manual
±
Firewall Settings
The Broadband router provides extensive firewall protection by restricting connection
parameters, thus limiting the risk of hacker attacks, and defending against a wide array
of common Internet attacks. However, for applications that require unrestricted access to
the Internet, you can configure a specific client/server as a Demilitarized Zone (DMZ).
Page 58 / 110
Wireless Router
RNX-EasyN4
User Manual
Note
: To enable the Firewall settings select Enable and click Apply
- Advanced
You can allow the VPN packets to pass through this Broadband router.
Page 59 / 110
Wireless Router
RNX-EasyN4
User Manual
- Demilitarized Zone (DMZ)
If you have a client PC that cannot run an Internet application (e.g. Games)
properly from behind the NAT firewall, then you can open up the firewall restrictions
to unrestricted two-way Internet access by defining a DMZ Host. The DMZ function
allows you to re-direct all packets going to your WAN port IP address to a particular
IP address in your LAN. The difference between the virtual server and the DMZ
function is that the virtual server re-directs a particular service/Internet application
(e.g. FTP, websites) to a particular LAN client/server, whereas DMZ re-directs all
packets (regardless of services) going to your WAN IP address to a particular LAN
client/server.
Page 60 / 110
Wireless Router
RNX-EasyN4
User Manual
Enable DMZ:
Enable/disable DMZ
LAN IP Address:
Fill-in the IP address of a particular host in your LAN Network that
will receive all the packets originally going to the WAN port/Public
IP address above.
Click
<Apply>
at the bottom of the screen to save the above configurations.
- Denial of Service (DoS)
The Broadband router's firewall can block common hacker attacks, including
Denial of Service, Ping of Death, Port Scan and Sync Flood. If Internet attacks occur
the router can log the events.
19216811.live