Page 76 / 110
Scroll up to view Page 71 - 75
Wireless Router
RNX-EasyN4
User Manual
get enough bandwidth. This can let you have a better experience in using critical real
time services like Internet phone, video conference …etc. All the applications not
specified by you are classified as rule “Others”. The rule with a smaller priority
number has a higher priority; the rule with a larger priority number has a lower
priority. You can adjust the priority of the rules by moving them up or down.
Priority Queue
This can put the packets of specific protocols in High/Low Queue. The packets
in High Queue will process first.
Page 77 / 110
Wireless Router
RNX-EasyN4
User Manual
Unlimited Priority Queue:
The LAN IP address will not be bounded in the QoS
limitation.
High/Low Priority Queue:
This can put the packets in the protocol and port range to
High/Low QoS Queue.
Bandwidth Allocation:
This can reserve / limit the throughput of specific protocols and port range. You
can set the upper bound and Lower bound.
Page 78 / 110
Wireless Router
RNX-EasyN4
User Manual
Type:
Specify the direction of packets. Upload, download or both.
IP range:
Specify the IP address range. You could also fill one IP address
Protocol:
Specify the packet type. The default ALL will put all packets in the QoS
priority Queue.
Port range:
Specify the Port range. You could also fill one Port.
Policy:
Specify the policy the QoS,
Min
option will reserve the selected data rate in
QoS queue.
Max
option will limit the selected data rate in QoS queue.
Rate:
The data rate of QoS queue.
Disabled:
This could turn off QoS feature.
- Routing
You can set enable Static Routing to let the router forward packets by your routing
policy.
Page 79 / 110
Wireless Router
RNX-EasyN4
User Manual
Destination LAN IP:
Specify the destination LAN IP address of static routing rule.
Subnet Mask:
Specify the Subnet Mask of static routing rule.
Default Gateway:
Specify the default gateway of static routing rule.
Hops:
Specify the Max Hops number of static routing rule.
Interface:
Specify the Interface of static routing rule.
±
TOOLS Settings
- Admin
You can change the password required to log into the broadband router's system
web-based management. By default, the password is: admin. Passwords can contain
0 to 12 alphanumeric characters, and are case sensitive.
Page 80 / 110
Wireless Router
RNX-EasyN4
User Manual
Old Password:
Fill in the current password to allow changing to a new password.
New Password:
Enter your new password and type it again in
Repeat New
Password
for verification purposes
Remote managemen
t
This allows you to designate a host in the Internet the ability to configure the
Broadband router from a remote site. Enter the designated host IP Address in
the Host IP Address field.
19216811.live