Page 91 / 110
Scroll up to view Page 86 - 90
Wireless Router
RNX-EasyN4
User Manual
You can see the UP time, hardware information, serial number as well as firmware
version information.
LAN Settings:
This page displays the Broadband router LAN port’s current LAN &
WLAN information. It also shows whether the DHCP Server function is enabled /
disabled. Wireless configuration details such as SSID, Security settings, BSSID,
Channel number, mode of operation are briefly shown.
WLAN Settings:
View Broadband router’s current configuration settings. Device Status
displays the configuration settings you’ve configured in the Wizard / Basic Settings
/ Wireless Settings section
- LAN
The LAN Tabs reveals LAN settings which can be altered at will. If you are an entry
level user, try accessing a website from your browser. If you can access website without
a glitch, just do not change any of these settings.
Click
<Apply>
at the bottom of this screen to save the changed configurations.
Page 92 / 110
Wireless Router
RNX-EasyN4
User Manual
IP address:
It is the router’s LAN IP address (Your LAN clients default gateway IP
address). It can be changed based on your own choice.
IP Subnet Mask:
Specify a Subnet Mask for your LAN segment.
802.1d Spanning Tree:
This is disabled by default. If 802.1d Spanning Tree function
is enabled, this router will use the spanning tree protocol to
prevent network loops.
- Schedule
Add schedule, edit schedule options allow configuration of power savings services. Fill
in the schedule and select type of service. Click
<Apply>
to implement the settings.
Page 93 / 110
Wireless Router
RNX-EasyN4
User Manual
The schedule table lists the pre-schedule service-runs. You can select any of them
using the check box.
Page 94 / 110
Wireless Router
RNX-EasyN4
User Manual
- Event Log
View operation
log of RNX-EASYN4
. This page shows the current system log of
the Broadband router. It displays any event occurred after system start up. At the
bottom of the page, the system log can be saved
<Save>
to a local file for further
processing or the system log can be cleared
<Clear>
or it can be refreshed
<Refresh>
to get the most updated information. When the system is powered down,
the system log will disappear if not saved to a local file.
Page 95 / 110
Wireless Router
RNX-EasyN4
User Manual
- Monitor
Show the network packets histogram for network connection on WAN, LAN &
WLAN. Auto refresh keeps information updated frequently.
- Language
This Wireless Router support multiple language of web pages, you could select
your native language here.
19216811.live