Page 96 / 110
Scroll up to view Page 91 - 95
Wireless Router
RNX-EasyN4
User Manual
±
Wireless
-Basic
You can set parameters that are used for the wireless stations to connect to this router.
The parameters include Mode, ESSID, Channel Number and Associated Client.
Page 97 / 110
Wireless Router
RNX-EasyN4
User Manual
Radio:
Enable or Disable Wireless function
Band:
Allows you to set the AP fixed at 802.11b, 802.11g or 802.11n mode. You
can also select B+G mode to allow 802.11b and 802.11g clients at the same
time.
Enable ESSID:
You can specify the maximum ESSID number.
ESSID1~3:
Allow you to specify ESSID of WLAN.
Site Survey:
You can scan the current Wireless Access Point and connect on it.
Page 98 / 110
Wireless Router
RNX-EasyN4
User Manual
-Clint List
This WLAN Client Table shows the Wireless client associate to this Wireless
Router.
Page 99 / 110
Wireless Router
RNX-EasyN4
User Manual
-Policy
The Broadband router can allow you to set up the Wireless Access Policy.
Communication between Wireless clients:
Allow Wireless Client to communicate with other Wireless Client on specific SSID.
Communication between Wireless clients and wired clients:
Allow Wireless Client to communicate with other Wireless Client on specific SSID
and Wired Client on the switch. Or Wireless Client will allow to access WAN port only
Page 100 / 110
Wireless Router
RNX-EasyN4
User Manual
±
Tools
- Admin
You can change the password required to log into the broadband router's system
web-based management. By default, the password is: admin. Passwords can contain
0 to 12 alphanumeric characters, and are case sensitive.
Old Password:
Fill in the current password to allow changing to a new password.
19216811.live