Page 26 / 110
Scroll up to view Page 21 - 25
Wireless Router
RNX-EasyN4
User Manual
12
AP Router Mode
±
System
- Status
This page allows you to monitor the current status of your router. You can use the
status page to quickly see if you have any updated firmware available (bug fixes,
updates). You can navigate from this page with a few interesting options for reminding or
skipping this page forever & so forth.
Once you click on
<OK>
button to go to the requested page, you can see the status
page of the RNX-EASYN4.
System:
You can see the UP time, hardware information, serial number as well as
firmware version information.
Page 27 / 110
Wireless Router
RNX-EasyN4
User Manual
WAN Settings:
This section displays whether the WAN port is connected to a
Cable/DSL connection. It also displays the router’s WAN IP
address, Subnet Mask, and ISP Gateway as well as MAC
address, the Primary DNS.
LAN Settings:
This section displays the Broadband router LAN port’s current LAN
& WLAN information. It also shows whether the DHCP Server
function is enabled / disabled.
Page 28 / 110
Wireless Router
RNX-EasyN4
User Manual
WLAN Settings:
This section displays the current WLAN configuration settings
you’ve configured in the Wizard / Basic Settings / Wireless
Settings section. Wireless configuration details such as SSID,
Security settings, BSSID, Channel number, mode of operation
are briefly shown.
Page 29 / 110
Wireless Router
RNX-EasyN4
User Manual
- LAN
The LAN Tabs reveals LAN settings which can be altered at will. If you are an
entry level user, try accessing a website from your browser. If you can access
website without a glitch, just do not change any of these settings.
Click
<Apply>
at the bottom of this screen to save the changed configurations.
Page 30 / 110
Wireless Router
RNX-EasyN4
User Manual
LAN IP
IP address:
192.168.0.1. It is the router’s LAN IP address (Your LAN clients default
gateway IP address). It can be changed based on your own choice.
IP Subnet Mask:
255.255.255.0 Specify a Subnet Mask for your LAN segment.
802.1d Spanning Tree:
This is disabled by default. If 802.1d Spanning Tree function
is enabled, this router will use the spanning tree protocol to
prevent network loops.
DHCP Server
DHCP Server:
This will enable or disable the Dynamic Pool setting..
Lease time:
This is the lease time of each assigned IP address.
19216811.live