Page 51 / 82 Scroll up to view Page 46 - 50
X5671
User’s Guide
46
Click
Save/Apply
to save the configuration
Station Information
The table shows up whole associated wireless clients the device and their status.
Figure 58: Wireless Setting – Station Information
Global Setting
Click Refresh to get the latest updated information
Page 52 / 82
X5671
User’s Guide
47
8
Diagnostic
The Diagnostic web page provides the connection check in physical layer and upper
layer. The result is helpful to figure out the problem if you have problem to surf
Internet.
Diagnostic
This page will show up the result of diagnostic in physical layer like WAN port and also
upper layer of PPP if ISP provides the PPP access protocol.
Figure 59: Diagnostic Result
Global Setting:
Click the
Connection
to test another connection.
Click the
Test
to test it again
Click
Test with OAM F4
to verify the DSL link.
Page 53 / 82
X5671
User’s Guide
48
9
Management
The Management web page menu comprises:
Settings
System Log
TR-069 Client
Internet Time
Access Control
Update Software
Save/Reboot
Settings
This page allows you to backup the current configuration of the device, update the
configuration, and restore default configuration (factory setting).
Backup
Figure 60: Backup Settings
Click Backup Settings to backup the current settings of the device into file in PC.
Update
Figure 61: Restore Default Settings
Click
Browser
to specify the configuration file (settings) in PC and click
Update
Settings
to upload the settings to the device.
Page 54 / 82
X5671
User’s Guide
49
Restore Default
Figure 62: Restore Default Settings
Click Restore Default Settings to restore the factory default settings.
System Log
This page allows you to view system log and also configure system log that way you
want to see.
Figure 63: Management Configuration – System Log
Global Setting
Click
View System Log
to view system log
Click
Configure System Log
to configure the way you want to see
Figure 64: Management Configuration – Configure System Log
Page 55 / 82
X5671
User’s Guide
50
Global Setting
Select to
Enable Log
function or not
Select
Log Level
from the list
Select
Display Level
from the list
Select
Mode
from the list
Click
Save/Apply
to save the configuration.
TR-069 Client
This page allows you to access TR-069 ACS (Auto-Configuration Server). The ACS
can provision, configure, and diagnostic the device from remote site.
Figure 65: Management Configuration – Firmware Upgrade
Global Setting
Select to
Enable
or
Disable
to send
Inform
packet to ACS.
Enter the
Inform Interval
number of seconds. The Inform packet will be sent to
ACS periodically.
Enter the
ACS URL
to reach ACS
Enter the
ACS User Name
and
Password
Enter the
Connection Request User Name
and
Password
Click
Save/Apply
to save the configuration

Rate

3.5 / 5 based on 2 votes.

Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top