1. Home
    2. /
  2. Manuals
    3. /
  3. Huawei
    4. /
  4. HG8247H
    5. /
  5. 38
Page 186 / 358 Scroll up to view Page 181 - 185
NOTE
If the upper-layer network requires isolation of media streams from signaling streams, create
different traffic streams for the media streams and signaling streams on the OLT, create a
WAN port on the ONT, and set this WAN port to a media WAN port. Specifically, choose
Interface 1
>
RTP
and set
Associate WAN Interface
to
wan 2
.
(6)
Configure SIP protocol parameters.
In the navigation tree, choose
Services
>
Voice Service
>
Voice Service 1
>
Interface configuration
>
Interface 1
>
SIP
. Select
SIP
and enter (or select) a
proper value.
–
Proxy Server: 200.200.200.200
–
Home Domain: softx3000.huawei.com
NOTE
If dual-homing is configured,
Secondary Proxy Server
must be set.
(7)
Configure the voice users.
3 Configuration
EchoLife HG8240/HG8245/HG8247 GPON Terminal
Service Manual
3-148
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Issue 04 (2011-01-12)
Page 187 / 358
a.
In the navigation tree, choose
Services
>
Voice Service
>
Voice Service
1
>
Interface configuration
>
Interface 1
>
User
. Select
User
, right-click,
and choose
Add
from the shortcut menu.
NOTE
A maximum of two users can be configured on the HG8240/HG8245/HG8247.
b.
Click
User 1
below
User
and set
Interface ID
to
1
. Click
User 2
below
User
and set
Interface ID
to
2
.
NOTE
If
Interface ID
is
1
, port TEL1 on the ONT is bound. If
Interface ID
is
2
, port TEL2
on the ONT is bound.
(8)
Click
OK
to complete the configuration of the new profile.
3.
Bind the value-added service profile.
(1)
In the
Physical Map
navigation tree on the
Main Topology
tab page, double-
click the target OLT, or select the target OLT, right-click, and choose
NE
Explorer
.
(2)
In the navigation tree, choose
GPON
>
GPON ONU
.
(3)
On the
GPON ONU
tab page, set the search criteria to find the GPON ONU
records.
(4)
Select an ONT from the list, right-click, and choose
Bind VAS Profile
from the
shortcut menu. In the dialog box that is displayed, choose the created profile, and
click
OK
to complete profile binding.
4.
Configure ONT value-added services.
(1)
On the
GPON ONU
tab page, select an ONT, right-click, and choose
Configure
Value-Added Service
from the shortcut menu.
(2)
Configure parameters of the SIP-based voice users.
NOTE
The parameters of the SIP-based voice user must be consistent with the corresponding
configuration on the softswitch.
EchoLife HG8240/HG8245/HG8247 GPON Terminal
Service Manual
3 Configuration
Issue 04 (2011-01-12)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
3-149
Page 188 / 358
a.
In the navigation tree, choose
Services
>
Voice Service
>
Voice Service
1
>
Interface configuration
>
Interface1
>
User
>
User 1
. Select
User
1
and set
Directory Number
to
88001234
.
b.
Select
SIP
below
User 1
and enter a proper value.
–
Auth User Name: [email protected]
–
Auth Password: iadtest1
c.
Set parameters of
User 2
using the same method.
–
Directory Number: 88001235
–
Auth User Name: [email protected]
–
Auth Password: iadtest2
3 Configuration
EchoLife HG8240/HG8245/HG8247 GPON Terminal
Service Manual
3-150
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Issue 04 (2011-01-12)
Page 189 / 358
(3)
Click
OK
. In the dialog box that is displayed, click
OK
. After the device
automatically restarts, the configuration takes effect.
----End
Result
Connect two phone sets to two TEL ports of different ONTs, and calls can be made between
two phone sets.
Configuration File
vlan 200 smart
port vlan 200 0/19 0
arp proxy enable
interface vlanif 200
arp proxy enable
quit
dba-profile add profile-id 20 type3 assure 16384 max 26624
ont-lineprofile gpon profile-id 10
tcont 2 dba-profile-id 20
gem add 2 eth tcont 2 priority-queue 6
mapping-mode vlan
gem mapping 2 1 vlan 20
commit
quit
ont-srvprofile gpon profile-id 10
ont-port eth 4 pots 2
commit
quit
interface gpon 0/1
port 1 ont-auto-find enable
display ont autofind 1
ont confirm 1 ontid 1 sn-auth 6877687714852900 omci ont-lineprofile-id 10 ont-
srvprofile-id 10 desc HG8245
ont confirm 1 ontid 2 sn-auth 6877687714852901 omci ont-lineprofile-id 10 ont-
srvprofile-id 10 desc HG8245
ont alarm-profile 1 1 profile-id 1
ont alarm-profile 1 2 profile-id 1
quit
traffic table ip index 9 cir off priority 6 priority-policy tag-In-Packag
service-port 3 vlan 200 gpon 0/1/1 ont 1 gemport 2 multi-service user-vlan 20 rx-
cttr 9 tx-cttr 9
service-port 4 vlan 200 gpon 0/1/1 ont 2 gemport 2 multi-service user-vlan 20 rx-
cttr 9 tx-cttr 9
queue-scheduler wrr 10 10 20 20 40 0 0 0
cos-queue-map cos0 0 cos1 1 cos2 2 cos3 3 cos4 4 cos5 5 cos6 6 cos7 7
save
3.3.6 Configuring the GPON FTTH Layer 2 Multicast Service on the
OLT CLI
The OLT is connected to the remote ONT through a GPON port to provide users with the IPTV
service.
Service Requirements
l
The ONT is connected to the OLT in Layer 2 mode.
l
The OLT adopts IGMP proxy, a Layer 2 multicast protocol.
l
Multicast programs are configured statically and multicast users are authenticated.
l
The IGMP version of the multicast VLAN is IGMP V3.
EchoLife HG8240/HG8245/HG8247 GPON Terminal
Service Manual
3 Configuration
Issue 04 (2011-01-12)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
3-151
Page 190 / 358
l
The user accesses the device through GPON, and has the right to order programs from the
multicast source.
Table 3-9
Data plan
Item
Data
OLT
Service VLAN ID: 1000
Service VLAN type: smart VLAN
Upstream port: 0/19/0
Multicast protocol: IGMP Proxy
Multicast version: IGMP V3
IP address of the multicast server: 10.10.10.10
Multicast program: 224.1.1.10
ONT
ONT IDs: 1 and 2
ID of the port on the ONT that is connected to the STB: 3
Type of the port on the ONT that is connected to the STB:
ETH
VLAN ID of the port on the ONT that is connected to the
STB: 30
Prerequisite
l
The license for the multicast program or the multicast user must already be requested and
installed.
l
The OLT is connected to the BRAS and the multicast source.
l
The VLAN of the LAN switch port connected to the OLT is the same as the upstream
VLAN of the OLT.
Procedure
l
Configure the OLT.
1.
Create a service VLAN and add an upstream port to it.
The VLAN ID is 1000, and the VLAN is a smart VLAN, Add upstream port 0/19/0
to VLAN 1000.
huawei(config)#
vlan 1000 smart
huawei(config)#
port vlan 1000 0/19 0
2.
(Optional) Configure upstream link aggregation.
In this example, a single upstream port is used. In the case of multiple upstream ports,
upstream link aggregation can be configured. For details, see Configuring Upstream
Link Aggregation.
3.
Configure GPON ONT profiles.
GPON ONT profiles include the DBA profile, line profile, service profile, and alarm
profile.
3 Configuration
EchoLife HG8240/HG8245/HG8247 GPON Terminal
Service Manual
3-152
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Issue 04 (2011-01-12)

Rate

4.5 / 5 based on 2 votes.

Popular Huawei Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top