Huawei HG8247H Router Manual PDF (Setup & Configuration Guide)

Page 196 / 358 Scroll up to view Page 191 - 195

The ONT is connected to the upper-layer device in Layer 2 mode and no configuration is

required.

----End

Result

The user can watch program1 on the TV.

Configuration File

vlan 1000 smart

port vlan 1000 0/19 0

dba-profile add profile-id 30 type4 max 61440

ont-lineprofile gpon profile-id 10

tcont 3 dba-profile-id 30

gem add 3 eth tcont 3

mapping-mode vlan

gem mapping 3 2 vlan 30

commit

quit

ont-srvprofile gpon profile-id 10

ont-port eth 4 pots 2

port vlan eth 3 30

commit

quit

interface gpon 0/1

port 1 ont-auto-find enable

display ont autofind 1

ont confirm 1 ontid 1 sn-auth 6877687714852900 omci ont-lineprofile-id 10 ont-

srvprofile-id 10 desc HG8245

ont confirm 1 ontid 2 sn-auth 6877687714852901 omci ont-lineprofile-id 10 ont-

srvprofile-id 10 desc HG8245

ont alarm-profile 1 1 profile-id 1

ont alarm-profile 1 2 profile-id 1

ont port native-vlan 1 1 eth 3 vlan 30

ont port native-vlan 1 2 eth 3 vlan 30

quit

traffic table ip index 10 cir off priority 4 priority-policy tag-In-Package

service-port 5 vlan 1000 gpon 0/1/1 ont 1 gemport 3 multi-service user-vlan 30 rx-

cttr 10 tx-cttr 10

service-port 6 vlan 1000 gpon 0/1/1 ont 2 gemport 3 multi-service user-vlan 30 rx-

cttr 10 tx-cttr 10

queue-scheduler wrr 10 10 20 20 40 0 0 0

cos-queue-map cos0 0 cos1 1 cos2 2 cos3 3 cos4 4 cos5 5 cos6 6 cos7 7

multicast-vlan 1000

igmp mode proxy

igmp version v3

igmp uplink-port 0/19/0

btv

igmp uplink-port-mode default

multicast-vlan 1000

igmp program add name program1 ip 224.1.1.10 sourceip 10.10.10.10

btv

igmp profile add profile-name profile0

igmp profile profile-name profile0 program-name program1 watch

igmp policy service-port 5 normal

igmp policy service-port 6 normal

igmp user add service-port 5 auth

igmp user add service-port 6 auth

igmp user bind-profile service-port 5 profile-name profile0

igmp user bind-profile service-port 6 profile-name profile0

multicast-vlan 1000

igmp multicast-vlan member service-port 5

igmp multicast-vlan member service-port 6

quit

save

3 Configuration

EchoLife HG8240/HG8245/HG8247 GPON Terminal

Service Manual

3-158

Huawei Proprietary and Confidential

Issue 04 (2011-01-12)

Page 197 / 358

3.3.7 Configuring the GPON FTTH Layer 3 Bridge Multicast Service

on the OLT CLI

The OLT is connected to the remote ONT through a GPON port to provide users with the IPTV

service.

Service Requirements

l

The ONT is connected to the OLT in the Layer 3 bridge mode.

l

The OLT adopts IGMP proxy, a Layer 2 multicast protocol.

l

Multicast programs are configured statically and multicast users are authenticated.

l

The IGMP version of the multicast VLAN is IGMP V3.

l

The user accesses the device through GPON, and has the right to order programs from the

multicast source.

Table 3-10

Data plan

Item

Data

OLT

Service VLAN ID: 1000

Service VLAN type: smart VLAN

Upstream port: 0/19/0

Multicast protocol: IGMP Proxy

Multicast version: IGMP V3

Multicast forwarding packets: untag

IP address of the multicast server: 10.10.10.10

Multicast program: 224.1.1.10

ONT

ONT IDs: 1 and 2

ID of the port on the ONT that is connected to the STB: 3

Type of the port on the ONT that is connected to the STB:

ETH

VLAN ID of the port on the ONT that is connected to the

STB: 30

Prerequisite

l

The license for the multicast program or the multicast user must already be requested and

installed.

l

The OLT is connected to the BRAS and the multicast source.

l

The VLAN of the LAN switch port connected to the OLT is the same as the upstream

VLAN of the OLT.

Procedure

l

Configure the OLT.

EchoLife HG8240/HG8245/HG8247 GPON Terminal

Service Manual

3 Configuration

Issue 04 (2011-01-12)

Huawei Proprietary and Confidential

3-159

Page 198 / 358

1.

Create a service VLAN and add an upstream port to it.

The VLAN ID is 1000, and the VLAN is a smart VLAN, Add upstream port 0/19/0

to VLAN 1000.

huawei(config)#

vlan 1000 smart

huawei(config)#

port vlan 1000 0/19 0

2.

(Optional) Configure upstream link aggregation.

In this example, a single upstream port is used. In the case of multiple upstream ports,

upstream link aggregation can be configured. For details, see Configuring Upstream

Link Aggregation.

3.

Configure GPON ONT profiles.

GPON ONT profiles include the DBA profile, line profile, service profile, and alarm

profile.

–

DBA profile: A DBA profile describes the GPON traffic parameters. A T-CONT

is bound to a DBA profile for dynamic bandwidth allocation, improving the

upstream bandwidth usage rate.

–

Line profile: A line profile describes the binding between the T-CONT and the

DBA profile, the QoS mode of the traffic stream, and the mapping between the

GEM port and the ONT-side service.

–

Service profile: A service profile provides the service configuration channel for

the ONT that is managed through OMCI.

–

Alarm profile: An alarm profile contains a series of alarm thresholds to measure

and monitor the performance of activated ONT lines. When a statistical value

reaches the threshold, the host is notified and an alarm is reported to the log host

and the NMS.

(1)

Configure a DBA profile.

Run the

display dba-profile

command to query the existing DBA profiles in the

system. If the existing DBA profiles in the system do not meet the requirement,

run the

dba-profile add

command to create a DBA profile.

Set the DBA profile ID to 30, type to type4, and maximum bandwidth to 60 Mbit/

s.

huawei(config)#

dba-profile add profile-id 30 type4 max 61440

(2)

Configure an ONT line profile.

Create GPON ONT line profile 10 and bind T-CONT 3 to DBA profile 30.

huawei(config)#

ont-lineprofile gpon profile-id 10

huawei(config-gpon-lineprofile-10)#

tcont 3 dba-profile-id 30

Create GEM port 3 for carrying traffic streams of the ETH type and bind GEM

port 3 to T-CONT 3. Set the QoS mode to priority-queue (default).

NOTE

a.

To change the QoS mode, run the

qos-mode

command to configure the QoS mode to gem-

car or flow-car, and run the

gem add

command to configure the ID of the traffic profile

bound to the GEM port.

b.

When the QoS mode is PQ, the default queue priority is 0; when the QoS is flow-car,

traffic profile 6 is bound to the port by default (no rate limitation); when the QoS mode is

gem-car, traffic profile 6 is bound to the port by default (no rate limitation).

huawei(config-gpon-lineprofile-10)#

gem add 3 eth tcont 3

Configure the service mapping mode from the GEM port to the ONU to VLAN

(default), and map CVLAN 30 to GEM port 3.

3 Configuration

EchoLife HG8240/HG8245/HG8247 GPON Terminal

Service Manual

3-160

Huawei Proprietary and Confidential

Issue 04 (2011-01-12)

Page 199 / 358

huawei(config-gpon-lineprofile-10)#

mapping-mode vlan

huawei(config-gpon-lineprofile-10)#

gem mapping 3 2 vlan 30

After the configurations are complete, run the

commit

command to make the

configured parameters take effect.

huawei(config-gpon-lineprofile-10)#

commit

huawei(config-gpon-lineprofile-10)#

quit

(3)

Configure an ONT service profile.

The service profile type must be the same as the actual ONT type. The HG8240

and HG8245 each have four ETH ports and two POTS ports. The HG8247 has

four ETH ports, two POTS ports, and one CATV port. The multicast packets

forwarded by the ONT do not carry VLAN tags.

NOTE

When the Layer 3 bridge multicast service is configured, the forwarded multicast packets must

be untagged.

huawei(config)#

ont-srvprofile gpon profile-id 10

huawei(config-gpon-srvprofile-10)#

ont-port eth 4 pots 2

huawei(config-gpon-srvprofile-10)#

multicast-forward untag

After the configurations are complete, run the

commit

command to make the

configured parameters take effect.

huawei(config-gpon-srvprofile-10)#

commit

huawei(config-gpon-srvprofile-10)#

quit

(4)

(Optional) Configure an alarm profile.

–

The ID of the default GPON alarm profile is 1. The thresholds of all the alarm

parameters in the default alarm profile are 0, which indicates that no alarm is

reported.

–

In this example, the default alarm profile is used, and therefore the

configuration of the alarm profile is not required.

–

Run the

gpon alarm-profile add

command to configure an alarm profile,

which is used for monitoring the performance of an activated ONT line.

4.

Add an ONT on the OLT.

The ONT is connected to the GPON port of the OLT through optical fibers. The service

can be configured only after an ONT is successfully added on the OLT.

Two ONTs are connected to GPON port 0/1/1. The ONT IDs are 1 and 2, the SNs are

6877687714852900 and 6877687714852901, the management mode is OMCI, and

ONT line profile 10 and service profile 10 are bound to the two ONTs.

(1)

Add an ONT offline.

If the password or SN of an ONT is obtained, you can run the

ont add

command

to add the ONT offline.

huawei(config)#

interface gpon 0/1

huawei(config-if-gpon-0/1)#

ont add 1 1 sn-auth 6877687714852900 omci

ont-lineprofile-id 10 ont-srvprofile-id 10 desc HG8245

huawei(config-if-gpon-0/1)#

ont add 1 2 sn-auth 6877687714852901 omci

ont-lineprofile-id 10 ont-srvprofile-id 10 desc HG8245

(2)

Automatically find an ONT.

If the password or SN of an ONT is unknown, run the

port

portid

ont-auto-

find

command in the GPON mode to enable the ONT auto-find function of the

GPON port. Then, run the

ont confirm

command to confirm the ONT.

huawei(config)#

interface gpon 0/1

huawei(config-if-gpon-0/1)#

port 1 ont-auto-find enable

huawei(config-if-gpon-0/1)#

display ont autofind 1

EchoLife HG8240/HG8245/HG8247 GPON Terminal

Service Manual

3 Configuration

Issue 04 (2011-01-12)

Huawei Proprietary and Confidential

3-161

Page 200 / 358

//After this command is executed, the information about all ONTs

connected to

the GPON port through the optical splitter is displayed.

---------------------------------------------------------------------

---

Number

: 1

F/S/P

: 0/1/1

Ont SN

: 6877687714852900

Password

:

VenderID

: HWTC

Ont Version

: 130C4600

Ont SoftwareVersion : V1R002C00

Ont EquipmentID

: 245

Ont autofind time

: 2010-12-10 14:59:10

---------------------------------------------------------------------

---

Number

: 2

F/S/P

: 0/1/1

Ont SN

: 6877687714852901

Password

:

VenderID

: HWTC

Ont Version

: 130C4600

Ont SoftwareVersion : V1R002C00

Ont EquipmentID

: 245

Ont autofind time

: 2010-12-10 14:59:12

---------------------------------------------------------------------

---

huawei(config-if-gpon-0/1)#

ont confirm 1 ontid 1 sn-auth

6877687714852900 omci ont-lineprofile-id 10 ont-srvprofile-id 10 desc

HG8245

huawei(config-if-gpon-0/1)#

ont confirm 1 ontid 2 sn-auth

6877687714852901 omci ont-lineprofile-id 10 ont-srvprofile-id 10 desc

HG8245

NOTE

If multiple ONTs of the same type are connected to a port and the same line profile or service

profile is bound to the ONTs, you can add ONTs in batches by confirming the auto discovered

ONTs in batches to simplify the operation and increase the configuration efficiency. For

example, the preceding command can be modified as follows:

huawei(config-if-gpon-0/1)#

ont confirm 1 all sn-auth omci ont-

lineprofile-id 10 ont-srvprofile-id 10

(3)

(Optional) Bind an alarm profile to the ONT.

In this example, bind the default alarm profile, namely alarm profile 1 to the

ONT.

huawei(config-if-gpon-0/1)#

ont alarm-profile 1 1 profile-id 1

huawei(config-if-gpon-0/1)#

ont alarm-profile 1 2 profile-id 1

5.

Confirm that the ONT goes online normally.

After an ONT is added, run the

display ont info

command to query the current status

of the ONT. Ensure that

Control flag

of the ONT is

active

,

Run State

is

online

,

Config state

is

normal

, and

Match state

is

match

.

huawei(config-if-gpon-0/1)#

display ont info 1 1

---------------------------------------------------------------------

F/S/P

:

0/1/1

ONT-ID

:

1

Control flag

:

active

//Indicates that the ONT is

activated.

Run state

:

online

//Indicates that the ONT goes online

3 Configuration

EchoLife HG8240/HG8245/HG8247 GPON Terminal

Service Manual

3-162

Huawei Proprietary and Confidential

Issue 04 (2011-01-12)

Rate

Popular Huawei Models

Famous Router IPs

Famous Router Companies

Bookmark Our Site

Share