Huawei HG8247H Router Manual PDF (Setup & Configuration Guide)

Page 181 / 358 Scroll up to view Page 176 - 180

(3)

Click

Apply

to apply the configuration.

3.

Configure parameters of the SIP-based voice interface.

(1)

In the navigation tree, choose

Voice

>

VoIP Interface Configuration

.

(2)

In the right pane, configure parameters of the SIP-based voice interface as follows

(other parameters use the default settings):

–

Set

Proxy Server Address

below

Primary Server

to

200.200.200.200

.

–

Home Domain: softx3000.huawei.com

–

Signaling Port: 1_VOIP_R_VID_20

–

Region: CN – China

NOTE

l

The parameters of the SIP-based voice interface must be consistent with the corresponding

configuration on the softswitch.

l

If dual-homing is configured,

Proxy Server Address

below

Secondary Server

must be

configured.

l

If

Signaling Port

is empty, the parameter value is the same as

Media Port

. If the upper-

layer network requires isolation of media streams from signaling streams, create different

traffic streams for the media streams and signaling streams on the OLT, create different

WAN ports on the ONT, and bind the created WAN ports to

Media Port

and

Signaling

Port

.

(3)

Click

Apply

to apply the configuration.

4.

Configure parameters of the SIP-based voice users.

(1)

In the navigation tree, choose

Voice

>

VoIP User Configuration

.

EchoLife HG8240/HG8245/HG8247 GPON Terminal

Service Manual

3 Configuration

Issue 04 (2011-01-12)

Huawei Proprietary and Confidential

3-143

Page 182 / 358

(2)

In the right pane, configure parameters of voice user 1 as follows:

–

Register User Name: 80001234

–

Auth User Name: [email protected]

–

Password: iadtest1

–

Associated POTS: 1 (binding port TEL1 on the ONT)

–

Select

Enable

to enable the voice user configuration.

(3)

Click

Apply

to apply the configuration.

(4)

In the right pane, click

New

to add voice user 2, and configure parameters of

voice user 2 as follows:

–

Register User Name: 80001235

–

Auth User Name: [email protected]

–

Password: iadtest2

–

Associated POTS: 2 (binding port TEL2 on the ONT)

–

Select

Enable

to enable the voice user configuration.

(5)

Click

Apply

to apply the configuration.

NOTE

l

The parameters of the SIP-based voice user must be consistent with the corresponding

configuration on the softswitch.

l

If

Associated POTS

is

1

, port TEL1 on the ONT is bound. If

Associated POTS

is

2

, port TEL2

on the ONT is bound.

5.

Save the configuration.

In the navigation tree, choose

System Tools

>

Configuration File

. In the right pane,

click

Save Configuration

to save the configuration.

6.

Restart the voice process.

In the navigation tree, choose

Status

>

VoIP Information

. In the right pane, click

Restart VoIP

.

3 Configuration

EchoLife HG8240/HG8245/HG8247 GPON Terminal

Service Manual

3-144

Huawei Proprietary and Confidential

Issue 04 (2011-01-12)

Page 183 / 358

7.

Check the ONT connection status.

In the navigation tree, choose

Status

>

WAN Information

. In the right pane,

Status

is

Connected

and the obtained IP address is displayed at

IP

.

8.

Check the registration status of the voice user.

In the navigation tree, choose

Status

>

VoIP Information

. In the right pane,

User

Status

is

Up

.

l

Configure the ONT on the U2000.

NOTE

Some voice parameters cannot be configured on the NMS but can be configured by importing an XML

configuration file. For details about how to import an XML configuration file, see

3.6.2 Operation Guide

on the XML Configuration File (on the U2000)

.

The following uses batch configurations of creating a value-added service profile of the

ONT as an example. To configure an ONT, on the GPON ONU tab page, select an ONT,

right-click, and choose

Configure Value-Added Service

from the shortcut menu.

1.

Log in to the NMS (iManager U2000 V100R002C01) and start the FTP service.

2.

Configure the value-added service profile of the ONT.

(1)

From the main menu, choose

Configuration

>

Access Profile Management

>

ONT VAS Profile

.

(2)

On the

ONT VAS Profile

tab page, right-click, and choose

Add

from the shortcut

menu.

(3)

In the dialog box that is displayed, set relevant parameters.

–

Profile Name: ONT-VoIP

–

Vendor ID: HWTC(2011)

–

Terminal Type: 245

–

Version: V1R002C00-V1R002C01

EchoLife HG8240/HG8245/HG8247 GPON Terminal

Service Manual

3 Configuration

Issue 04 (2011-01-12)

Huawei Proprietary and Confidential

3-145

Page 184 / 358

(4)

Configure the parameters of the voice WAN port.

a.

In the navigation tree, choose

WAN Device

>

WAN Device 1

>

WAN

Connection

. Select

WAN Connection

, right-click, and choose

Add IP

Connection

from the shortcut menu.

b.

Select

WAN IP Interface 1

and enter (or select) a proper value.

–

WAN Interface Name: ONT-VoIP

–

WAN Enable: enable

–

Connection Type: IP_Routed

–

VLAN ID: 20 (The VLAN ID of the ONT must be the same as the user-

side VLAN ID configured on the OLT.)

–

Priority: 6

–

Addressing Type: DHCP

–

Service List: VOIP (For configuring the VoIP service, VoIP or a

combination containing VoIP needs to be selected.)

3 Configuration

EchoLife HG8240/HG8245/HG8247 GPON Terminal

Service Manual

3-146

Huawei Proprietary and Confidential

Issue 04 (2011-01-12)

Page 185 / 358

(5)

Configure voice protocol parameters.

In the navigation tree, choose

Services

>

Voice Service

>

Voice Service 1

>

Interface configuration

>

Interface 1

. Select

Interface 1

and select a proper

value.

–

Signaling Protocol: SIP

–

Region: China

–

Associate WAN Interface: wan1 (binding the created voice WAN port)

EchoLife HG8240/HG8245/HG8247 GPON Terminal

Service Manual

3 Configuration

Issue 04 (2011-01-12)

Huawei Proprietary and Confidential

3-147

Rate

Popular Huawei Models

Famous Router IPs

Famous Router Companies

Bookmark Our Site

Share