Huawei HG8247H Router Manual PDF (Setup & Configuration Guide)

Page 171 / 358 Scroll up to view Page 166 - 170

(7)

Configure the voice users.

a.

In the navigation tree, choose

Services

>

Voice Service

>

Voice Service

1

>

Interface configuration

>

Interface 1

>

User

. Select

User

, right-click,

and choose

Add

from the shortcut menu.

NOTE

A maximum of two users can be configured on the HG8240/HG8245/HG8247.

b.

Click

User 1

below

User

and set

Interface ID

to

1

. Click

User 2

below

User

and set

Interface ID

to

2

.

NOTE

If

Interface ID

is

1

, port TEL1 on the ONT is bound. If

Interface ID

is

2

, port TEL2

on the ONT is bound.

(8)

Click

OK

to complete the configuration of the new profile.

3.

Bind the value-added service profile.

EchoLife HG8240/HG8245/HG8247 GPON Terminal

Service Manual

3 Configuration

Issue 04 (2011-01-12)

Huawei Proprietary and Confidential

3-133

Page 172 / 358

(1)

In the

Physical Map

navigation tree on the

Main Topology

tab page, double-

click the target OLT, or select the target OLT, right-click, and choose

NE

Explorer

.

(2)

In the navigation tree, choose

GPON

>

GPON ONU

.

(3)

On the

GPON ONU

tab page, set the search criteria to find the GPON ONU

records.

(4)

Select an ONT from the list, right-click, and choose

Bind VAS Profile

from the

shortcut menu. In the dialog box that is displayed, choose the created profile, and

click

OK

to complete profile binding.

4.

Configure the ONT value-added service.

(1)

On the

GPON ONU

tab page, select an ONT, right-click, and choose

Configure

Value-Added Service

from the shortcut menu.

(2)

Configure the domain name of the MG.

In the navigation tree, choose

Services

>

Voice Service

>

Voice Service 1

>

Interface configuration

>

Interface 1

>

H248

. Select

H248

and set

Domain

name

to

6877687714852901

.

NOTE

Domain Name

is ONT's domain name registered on the MGC. It is globally unique.

Domain

Name

in this example is ONT's SN.

(3)

Configure the terminal ID for the H.248 voice user.

In the navigation tree, choose

Services

>

Voice Service

>

Voice Service 1

>

Interface configuration

>

Interface 1

>

User

.

a.

Click

User 1

>

H248

and set

TID

to

A0

.

3 Configuration

EchoLife HG8240/HG8245/HG8247 GPON Terminal

Service Manual

3-134

Huawei Proprietary and Confidential

Issue 04 (2011-01-12)

Page 173 / 358

b.

Click

User 2

>

H248

and set

TID

to

A1

.

NOTE

The terminal IDs

A0

and

A1

must be consistent with the corresponding configuration on the

MGC.

(4)

Click

OK

. In the dialog box that is displayed, click

OK

. After the device

automatically restarts, the configuration takes effect.

----End

Result

Connect two phone sets to two TEL ports of different ONTs, and calls can be made between

two phone sets.

EchoLife HG8240/HG8245/HG8247 GPON Terminal

Service Manual

3 Configuration

Issue 04 (2011-01-12)

Huawei Proprietary and Confidential

3-135

Page 174 / 358

Configuration File

vlan 200 smart

port vlan 200 0/19 0

arp proxy enable

interface vlanif 200

arp proxy enable

quit

dba-profile add profile-id 20 type3 assure 16384 max 26624

ont-lineprofile gpon profile-id 10

tcont 2 dba-profile-id 20

gem add 2 eth tcont 2

mapping-mode vlan

gem mapping 2 1 vlan 20

commit

quit

ont-srvprofile gpon profile-id 10

ont-port eth 4 pots 2

commit

quit

interface gpon 0/1

port 1 ont-auto-find enable

display ont autofind 1

ont confirm 1 ontid 1 sn-auth 6877687714852900 omci ont-lineprofile-id 10 ont-

srvprofile-id 10 desc HG8245

ont confirm 1 ontid 2 sn-auth 6877687714852901 omci ont-lineprofile-id 10 ont-

srvprofile-id 10 desc HG8245

ont alarm-profile 1 1 profile-id 1

ont alarm-profile 1 2 profile-id 1

quit

traffic table ip index 9 cir off priority 6 priority-policy tag-In-Package

service-port 3 vlan 200 gpon 0/1/1 ont 1 gemport 2 multi-service user-vlan 20 rx-

cttr 9 tx-cttr 9

service-port 4 vlan 200 gpon 0/1/1 ont 2 gemport 2 multi-service user-vlan 20 rx-

cttr 9 tx-cttr 9

queue-scheduler wrr 10 10 20 20 40 0 0 0

cos-queue-map cos0 0 cos1 1 cos2 2 cos3 3 cos4 4 cos5 5 cos6 6 cos7 7

save

3.3.5 Configuring the GPON FTTH VoIP Service (SIP-based) on the

OLT CLI

The OLT is connected to the remote ONT through a GPON port to provide users with the IP-

based high-quality and low-cost VoIP service.

Service Requirements

l

The ONT is connected to the SIP server through SIP.

l

The ONT obtains the IP address through DHCP.

l

Two phone sets are connected to two TEL ports of the ONT respectively, and calls can be

made between two phone sets.

l

Users of phone sets under different ONTs can call and communicate with each other.

l

The DBA mode of the VoIP service is assured bandwidth + maximum bandwidth, and no

rate limitation is performed on the upstream and downstream traffic.

3 Configuration

EchoLife HG8240/HG8245/HG8247 GPON Terminal

Service Manual

3-136

Huawei Proprietary and Confidential

Issue 04 (2011-01-12)

Page 175 / 358

Table 3-8

Data plan

Item

Data

OLT

S-VLAN ID: 200

S-VLAN type: smart VLAN

Upstream port: 0/19/0

C-VLAN ID: 20

ONT

ONT IDs: 1 and 2

IP address of the SIP server: 200.200.200.200/24

Port ID of the SIP server: 5060

SIP registration domain name: softx3000.huawei.com

Digitmap: x.S|x.# (Default)

SIP user phone number and password:

l

The phone number of user 1 is 88001234 and the

password is iadtest1.

l

The phone number of user 2 is 88001235 and the

password is iadtest2.

Prerequisite

l

The SIP interface data and the PSTN user data corresponding to the MG interface must be

configured on the SIP server.

l

The OLT must be connected to the SIP server. The IP address of the SIP server can be

pinged from the OLT.

l

For the ONT, to provision different voice services, you must select different software

versions. Before configuration, ensure that the ONT's version is V100R002C00.

Procedure

l

Configure the OLT.

1.

Create a service VLAN and add an upstream port to it.

The VLAN ID is 200, and the VLAN is a smart VLAN. Add upstream port 0/19/0 to

VLAN 200.

huawei(config)#

vlan 200 smart

huawei(config)#

port vlan 200 0/19 0

2.

(Optional) Configure upstream link aggregation.

In this example, a single upstream port is used. In the case of multiple upstream ports,

upstream link aggregation can be configured. For details, see Configuring Upstream

Link Aggregation.

3.

Enables ARP proxy.

For different users of the same SVLAN, because the service ports of the smart VLAN

are isolated from each other, the voice media streams cannot interchange normally.

Therefore, the ARP proxy function of the OLT needs to be enabled.

huawei(config)#

arp proxy enable

huawei(config)#

interface vlanif 200

EchoLife HG8240/HG8245/HG8247 GPON Terminal

Service Manual

3 Configuration

Issue 04 (2011-01-12)

Huawei Proprietary and Confidential

3-137

Rate

Popular Huawei Models

Famous Router IPs

Famous Router Companies

Bookmark Our Site

Share