Huawei HG8245T Router Manual PDF (Setup & Configuration Guide)

Page 166 / 429 Scroll up to view Page 161 - 165

(3)

Click

Apply

to apply the configuration.

4.

Configure parameters of the H.248-based voice users.

(1)

In the navigation tree, choose

Voice

>

VoIP User Configuration

.

(2)

In the right pane, configure the parameters of voice user 1 as follows:

–

Line Name: A0

–

Associated POTS: 1 (binding port TEL1 on the ONT)

–

Select

Enable Line Name

to enable the voice user configuration.

(3)

Click

Apply

to apply the configuration.

(4)

In the right pane, click

New

to add voice user 2, and configure the parameters of

voice user 2 as follows:

–

Line Name: A1

–

Associated POTS: 2 (binding port TEL2 on the ONT)

–

Select

Enable Line Name

to enable the voice user configuration.

(5)

Click

Apply

to apply the configuration.

NOTE

l

The terminal IDs

A0

and

A1

must be consistent with the corresponding configuration on the

MGC.

l

If

Associated POTS

is

1

, port TEL1 on the ONT is bound. If

Associated POTS

is

2

, port TEL2

on the ONT is bound.

5.

Save the configuration.

In the navigation tree, choose

System Tools

>

Configuration File

. In the right pane,

click

Save Configuration

to save the configuration.

EchoLife HG8010/HG8240B/HG8245T/HG8247T GPON

Terminal

Service Manual

3 Configuration

Issue 01 (2011-10-18)

Huawei Proprietary and Confidential

158

Page 167 / 429

6.

Restart the voice process.

In the navigation tree, choose

Status

>

VoIP Information

. In the right pane, click

Restart VoIP

.

7.

Check the ONT connection status.

In the navigation tree, choose

Status

>

WAN Information

. In the right pane,

Status

is

Connected

and the obtained IP address is displayed at

IP

.

8.

Check the registration status of the voice user.

In the navigation tree, choose

Status

>

VoIP Information

. In the right pane,

User

Status

is

Up

.

l

Configure the ONT on the U2000.

NOTE

Some voice parameters cannot be configured on the NMS but can be configured by importing an XML

configuration file. For details about how to import an XML configuration file, see

3.6.2 Operation Guide

on the XML Configuration File (on the U2000)

.

The following uses batch configurations of creating a value-added service profile of the

ONT as an example. To configure an ONT, on the GPON ONU tab page, select an ONT,

right-click, and choose

Configure Value-Added Service

from the shortcut menu.

1.

Log in to the NMS (iManager U2000 V100R003C00) and start the FTP service.

2.

Configure the value-added service profile of the ONT.

(1)

From the main menu, choose

Configuration

>

Access Profile Management

. In

the navigation tree of the tab page that is displayed, choose

PON Profile

>

ONT

VAS Profile

.

EchoLife HG8010/HG8240B/HG8245T/HG8247T GPON

Terminal

Service Manual

3 Configuration

Issue 01 (2011-10-18)

Huawei Proprietary and Confidential

159

Page 168 / 429

(2)

On the

ONT VAS Profile

tab page, right-click, and choose

Add

from the shortcut

menu.

(3)

In the dialog box that is displayed, set relevant parameters.

–

Profile Name: ONT-VoIP

–

Vendor ID: HWTC(2011)

–

Terminal Type: 247

–

Version: V1R003C00-Later

(4)

Configure the parameters of the voice WAN port.

a.

In the navigation tree, choose

WAN Device

>

WAN Device 1

>

WAN

Connection

. Select

WAN Connection

, right-click, and choose

Add IP

Connection

from the shortcut menu.

b.

Select

WAN IP Interface 1

and enter (or select) a proper value.

–

WAN Interface Name: ONT-VoIP

–

WAN Enable: enable

–

Connection Type: IP_Routed

–

VLAN ID: 20 (The VLAN ID of the ONT must be the same as the user-

side VLAN ID configured on the OLT.)

–

Priority: 6

–

Addressing Type: DHCP

–

Service List: VOIP (For configuring the VoIP service, VoIP or a

combination containing VoIP needs to be selected.)

EchoLife HG8010/HG8240B/HG8245T/HG8247T GPON

Terminal

Service Manual

3 Configuration

Issue 01 (2011-10-18)

Huawei Proprietary and Confidential

160

Page 169 / 429

(5)

Configure the voice protocol parameters.

In the navigation tree, choose

Services

>

Voice Service

>

Voice Service 1

>

Interface configuration

>

Interface 1

. Select

Interface 1

and select a proper

value.

–

Signaling Protocol: H248

–

Region: China

–

Associate WAN Interface: WAN1(ONT-VoIP) (binding the created voice

WAN port)

EchoLife HG8010/HG8240B/HG8245T/HG8247T GPON

Terminal

Service Manual

3 Configuration

Issue 01 (2011-10-18)

Huawei Proprietary and Confidential

161

Page 170 / 429

NOTE

If the upper-layer network requires isolation of media streams from signaling streams, create

different traffic streams for the media streams and signaling streams on the OLT, create a

WAN port named

WAN-RTP

on the ONT, and set this WAN port to a media WAN port.

Specifically, choose

Interface 1

>

RTP

and set

Associate WAN Interface

to

WAN2(WAN-

RTP)

.

(6)

Configure the MGC parameters.

In the navigation tree, choose

Services

>

Voice Service

>

Voice Service 1

>

Interface configuration

>

Interface 1

>

H248

. Select

H248

and enter (or select)

a proper value.

–

Primary MGC: 200.200.200.200

–

MID Format: Domain name

NOTE

l

If dual-homing is configured,

Secondary MGC

must be set.

l

MID Format

can be set to

Domain Name

,

IP

, or

Device name

.

EchoLife HG8010/HG8240B/HG8245T/HG8247T GPON

Terminal

Service Manual

3 Configuration

Issue 01 (2011-10-18)

Huawei Proprietary and Confidential

162

Rate

Popular Huawei Models

Famous Router IPs

Famous Router Companies

Bookmark Our Site

Share