–
VLAN ID: 20 (The VLAN ID of the ONT must be the same as the user-side
VLAN ID configured on the OLT.)
–
802.1p: 6
–
IP Acquisition Mode: DHCP
(3)
Click
Apply
to apply the configuration.
3.
Configure parameters of the SIP-based voice interface.
(1)
In the navigation tree, choose
Voice
>
VoIP Interface Configuration
.
(2)
In the right pane, configure parameters of the SIP-based voice interface as follows
(other parameters use the default settings):
–
Set
Proxy Server Address
below
Primary Server
to
200.200.200.200
.
–
Home Domain: softx3000.huawei.com
–
Signaling Port: 1_VOIP_R_VID_20
–
Region: CN – China
NOTE
l
The parameters of the SIP-based voice interface must be consistent with the corresponding
configuration on the softswitch.
l
If dual-homing is configured,
Proxy Server Address
below
Secondary Server
must be
configured.
l
If
Signaling Port
is empty, the parameter value is the same as
Media Port
. If the upper-
layer network requires isolation of media streams from signaling streams, create different
traffic streams for the media streams and signaling streams on the OLT, create different
WAN ports on the ONT, and bind the created WAN ports to
Media Port
and
Signaling
Port
.
EchoLife HG8010/HG8240B/HG8245T/HG8247T GPON
Terminal
Service Manual
3 Configuration
Issue 01 (2011-10-18)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
173