Huawei HG633 TalkTalk Router Manual PDF (Setup & Configuration Guide)

Page 16 / 40 Scroll up to view Page 11 - 15

11

2. Click

Create a new connection

in

Network Tasks

to display the

New Connection Wizard

window, and then click

3. Select

Connect to the Internet

, and then click

4. Select

Set up my connection manually

, and then click

5. Select

Connect using a broadband connection that requires a

user name and password

, and then click

6.

Enter the name (as desired) of the dial-up connection in

ISP Name

,

and then click

7. Select

Anyone's use

or

My use only

, and then click

8. Enter the user name and password provided by the network

operator and used for the dial-up connection,

9. Enter the password again in the

Confirm Password

text box to

confirm the password, and click

10. Select

Add a shortcut to this connection to my desktop

, and

then click

Finish

.

An icon for the dial-up connection is displayed on the desktop of your

computer.

You need to perform the preceding operations only once for creating a

network connection. After the network connection is created, to access the

network, double-click the icon for the dial-up connection, and then click

Connect

in the displayed dialog box.

2.4 Setting the parameters When Accessing

Network through Data card

When the HG533 is working in data card mode, you need to install the

Huawei HSPA data card on the HG533 so that your PC can connect to the

Internet through the HSPA uplink.

To create an HSPA uplink connection, do as follows:

Step 1

Log in to the web-based configuration utility.

Step 2

Click

Advanced

>

in the navigation tree on the left to display

the PIN Page.

Step 3

Enable the

UPLINK

function.

Page 17 / 40

12

1. Choose the

UPLINK

page.

2. Select the

HSPA Backup

check box.

3. Click

Submit

.

Step 4

Set the uplink working mode.

1. Choose the

UMTS

page.

2. Select

3G First

from the

Mobile Connection Type

drop-down

combo box.

3. Click

Submit

.

Step 5

Verify the PIN code of your SIM card.

1. Choose the

page.

2. Select

Verify

from the

PIN operation

drop-down combo box.

3.

Enter the PIN code that provided by your SIM card operator in the

text box.

4. Click

Submit

.

Step 6

Set the working mode of the HG533 to

PPP

.

1. In the navigation tree on the left of the web-based configuration

utility, choose

Basic

>

WAN

.

2. Click

New.

3. Select

UMTS

from the

Access type

.

4. Select

INTERNET

from the

Service list

.

5. Select

PPP

from the

Connection type

drop-down combo box.

6. Enter the user name and password provided by the network

operator in the

User name

and

Password

text boxes.

7. Enter the APN and Dial number that are provided by the network

operator in the

APN

and

Dial number

text boxes.

8. Keep the default settings of other parameters.

Page 18 / 40

13

9. Click

Submit

.

Page 19 / 40

14

3 Accessing the Network Wirelessly

3.1 Setting Up a Wireless Connection by

Pressing Buttons

The HG533 supports the Wi-Fi Protected Setup (WPS) function. If your

network adapter also supports the WPS function, you can use the WPS

function to set up a wireless connection between your PC and the HG533

quickly.

To configure the wireless network connection, do as follows:

Step 1

Check whether the

WLAN

indicator of the HG533 is on. If the

WLAN

indicator is off, Press the

WLAN

button on the side panel of

the HG533 to enable the WLAN function.

Step 2

Press the WPS button on the side panel of the HG533 to enable

the HG533 to enter the WPS negotiation state.

Step 3

Enable the WPS negotiation function of the wireless network

adapter on your PC within two minutes, and then wait for a moment

(typically 10s and at most 120s).

The WPS indicator of the HG533 becomes on from the blinking state,

indicating that the HG533 is connected to your PC through the WLAN. This

state lasts 300s. Then the WPS indicator turns off.

The WPS applications may vary with different types of wireless

network adapters. For details about the configuration and operations

of the WPS application, refer to the operation guide provided by the

application provider.

Page 20 / 40

15

3.2 Setting Up a Wireless Connection

Manually

If your network adapter does not support the WPS function, you can set up a

wireless connection between your PC and the HG533 manually.

Takes Windows XP as an example, to set up a wireless connection between

your PC and the HG533 manually, do as follows:

Step 1

Record the WLAN name and the WLAN access password of the

HG533.

The WLAN name (SSID) and WLAN access password of the HG533

are preset before delivery. You can find them from the label on the

bottom of the HG533.

In order to prevent unauthorized users from using your wireless

network, please change them. For details, see section 5.2

“

Changing

the Wireless Network Name and the Access Password

”。

Step 2

Set the WLAN and WLAN access password of the HG533.

To set the wireless network name and the access password, do as follows

(taking the authentication type WPA-PSK/WPA2-PSK as an example):

1. Log in to the Web-based configuration utility.

2.

In the navigation tree on the left of the web-based configuration

utility, choose

Basic

>

WLAN.

3. Choose the

WLAN

page.

4. Select the

Enable WLAN

check box.

5. Select the

SSID1

from the

SSID index

drop-down combo box.

6. Enter the WLAN name in the

SSID

text box.

7. Select

WPA-PSK/WPA2-PSK

from the

Security

drop-down

combo box.

8. Enter the WLAN access password in the

WPA pre

-s

hared key

text box.

9. Select

TKIP+AES

from the

WPA encryption

drop-down combo

box.

Rate

Popular Huawei Models

Famous Router IPs

Famous Router Companies

Bookmark Our Site

Share