Huawei HG633 TalkTalk Router Manual PDF (Setup & Configuration Guide)

Page 6 / 40 Scroll up to view Page 1 - 5

1

1 Connecting the Cables and Getting

Started

Thank you for purchasing the HUAWEI HG533 Home Gateway (hereinafter

referred to as the HG533).

You can go online using the ADSL, LAN, and data card services. However,

you can only use one type of service at one time. The default way of going

online is using the ADSL service, though you can go online using the data

card service when you cannot access the network using the ADSL or

Ethernet services.

1.1 Connecting Cables Using the ADSL

Interface

1.1.1 Connecting cables

If there is at least one available telephone jack in your home, you can go

online using the ADSL service.

1

2

3

4

5

a

b

c

6

Page 7 / 40

2

1.

Power adapter

2. Desktop Computer

3. Telephone

4.

Splitter

5. Telephone wall jack

6. Laptop Computer

a.

MODEM interface b. PHONE interface

c. LINE interface

1.1.2 Getting started

After connecting the cables, press the On/Off button on the side panel to

power on the HG533.

The ADSL indicator lights up and starts blinking. This indicates that the

ADSL port activation is in progress. The blinking may last less than 3

minutes. When the ADSL indicator stops blinking and remains on, the

HG533 is working properly.

1.2 Connecting Cables Using the WAN

Interface

1.2.1 Connecting the Cables

If there is at least one available network wall jack in your home, you can go

online using the Ethernet service.

1

2

3

4

b

5

a

1. Power adapter

2. Telephone

3. Wall jack

4.

Desktop Computer

5. Laptop Computer

a. Ethernet wall jack

b. Telephone wall jack

Page 8 / 40

3

1.2.2 Getting Started

After connecting the cables, press the On/Off button on the side panel to

power on the HG533.

The WAN indicator light turns on. This indicates that the HG533 is working

properly. When the WAN indicator light starts blinking, data is being

transmitted between the HG533 and the connected device.

1.3 Connecting Cables Using the USB

Interface

1.3.1 Connecting the Cables

If there are no available telephone or network jacks in your home, you can

go online using the data card service.

1

2

3

4

1. Power adapter 2. Desktop Computer 3. Data card 4. Laptop Computer

Page 9 / 40

4

1.3.2 Getting Started

Press down the On/Off button on the side of the HG533 to power on the

HG533.

The USB indicator light turns on, this indicates that the HG533 is working

properly. When the USB indicator light starts blinking, data is being

transmitted between the HG533 and the connected device.

Page 10 / 40

5

2 Setting Network-Access Parameters

2.1 Logging In to Web-based Configuration

Utility

The HG533 provides an easy-to-use web-based configuration utility. You

can view and set the parameters of the HG533 through this utility. The

following example uses a computer running the Windows XP operating

system to describe how to log in to the web-based configuration utility:

Step 1

Set the network connection of your PC and ensure that your

PC

obtains an IP address automatically, do as follows:

1. Choose

Start

>

All

Programs

>

Accessories

>

Communications

>

Network Connections

.

2. In the

Network Connections

window, right-click the working

Local Area Connection

and choose

Properties

.

3. In the

This connection uses the following items

group box of

the

Local Area Connection Properties

dialog box, select

Internet Protocol (TCP/IP)

. Click

Properties

.

4. Ensure that your PC select

Obtain an IP address automatically

.

By default, the DHCP function of the HG533 is enabled. In this case,

the HG533 assigns an IP address to your PC automatically and you

do not need to configure the IP address of your PC.

Step 2

Start the Internet Explorer on your PC and ensure that the Internet

Explorer does not use any proxy server.

Take the Internet Explorer 6.0 as an example. To ensure that the

Internet Explorer does not use any proxy server, do as follows:

1. Start the Internet Explorer. Choose

Tools

>

Internet

Options.

2. On the

Connections

tab of the

Internet Options

dialog box, click

LAN Settings

.

3. In the

Proxy Server

area, ensure that

Use the proxy server for

your LAN

is cleared. If

Use the proxy server for your LAN

is

Rate

Popular Huawei Models

Famous Router IPs

Famous Router Companies

Bookmark Our Site

Share