1. Home
    2. /
  2. Manuals
    3. /
  3. Huawei
    4. /
  4. HG633 TalkTalk
    5. /
  5. 3
Page 11 / 40 Scroll up to view Page 6 - 10
6
selected, clear
Use the proxy server for your LAN
, and then
click
OK
.
4. In
Internet Options
window, click OK to close the window.
Step 3
Launch a browser on your computer. Enter
in
the address box, and press
Enter
.
Step 4
On the login page, enter your user name and password.
By default, both the user name and password are
admin
. In order
to prevent unauthorized users from modifing your configuration
parameters, please change the password for login.
If the password has been changed, use the correct password to log
in.
Step 5
Click
Login
.
After the verification, the web-based configuration utility is
displayed.
2.2 Setting the Parameters When Accessing
Network through ADSL
By configuring the HG533 and your computer, you can choose any of the
following methods to surf the Internet:
Accessing the Network through the Embedded PPP Dial-Up Software
on the HG533
Accessing the Network through the PPP Dial-Up Software on Your
Computer
2.2.1 Accessing the Network through the Embedded PPP
Dial-Up Software on the HG533
If you select this method for accessing the network, the HG533 starts to set
up a dial-up connection automatically after starting up. You can access the
network after you power on your computer. You do not need to install any
special dial-up software on your computer or perform dial-up operations on
your computer.
To configure the HG533 and your computer for the network access, do as
follows:
Page 12 / 40
7
Step 1
Verify the HG533 and the PC have connected properly, and the PC
has obtained the IP address.
Step 2
Log in to the web-based configuration utility of the HG533.
Step 3
Enable the embedded dial-up function.
1. In the navigation tree on the left of the web-based configuration
utility, choose
Basic
>
WAN
.
2. Select
Enable
for
WAN connection
.
3.
Enter the VPI and VCI parameters that are provided by the network
operator in the
VPI/VCI
text boxes.
4. Select
INTERNET
from the
Service list
.
5. Select
PPPoE
from the
Connection typ
e drop-down combo box.
6. Enter the user name and password that are provided by the
network operator in the
User name
and
Password
text boxes.
7. Keep the default settings of other parameters.
8. Click
Submit
.
After completing the preceding configuration steps, you can begin browsing
the Internet.
You only need to perform the preceding operations on a computer once.
The next time you boot up your computer, you can browse the Internet
without performing the same configurations.
2.2.2 Accessing the Network through the PPP Dial-Up
Software on Your Computer
If you select this method for accessing the network, you need to install and
configure the dial-up software on your computer. In addition, you need to
perform dial-up operations on your computer upon each startup.
To configure the HG533 and your computer for the network access, do as
follows:
Step 1
Set the working mode of the HG533 to
Bridge
.
1.
Log in to the web-based configuration utility of the HG533.
2. In the navigation tree on the left of the web-based configuration
utility, choose
Basic
>
WAN
.
Page 13 / 40
8
3. Select
Enable
for
WAN connection
.
4.
Enter the VPI and VCI parameters that are provided by the network
operator in the
VPI/VCI
text boxes.
5. Select
INTERNET
from the
Service list
.
6. Select
Bridge
from the
Connection type
drop-down combo box.
7. Keep the default settings of other parameters.
8. Click
Submit
.
Step 2
Install and configure the PPP dial-up software on your computer.
The PPP dial-up software is pre-installed on certain computer operating
systems. To create a dial-up connection, do as follows (taking the
Windows XP operating system as an example):
1. Choose
Start
>
All
Programs
>
Accessories
>
Communications
>
Network Connections
.
2. Click
Create a new connection
in
Network Tasks
to display the
New Connection Wizard
window, and then click
Next
.
3. Select
Connect to the Internet
, and then click
Next
.
4. Select
Set up my connection manually
, and then click
Next
.
5. Select
Connect using a broadband connection that requires a
user name and password
, and then click
Next
.
6.
Enter the name (as desired) of the dial-up connection in
ISP Name
,
and then click
Next
.
7. Select
Anyone's use
or
My use only
, and then click
Next
.
8. Enter the
User name
and
password
provided by the network
operator and used for the dial-up connection.
9. Enter the password again in the
Confirm Password
text box to
confirm the password, and click
Next
.
10. Select
Add a shortcut to this connection to my desktop
, and
then click
Finish
.
An icon for the dial-up connection is displayed on the desktop of your
computer.
Page 14 / 40
9
You need to perform the preceding operations only once for creating a
network connection. After the network connection is created, to access the
network, double-click the icon for the dial-up connection, and then click
Connect
in the displayed dialog box.
2.3 Setting the parameters When Accessing
Network through Ethernet
By configuring the HG533 and your computer, you can choose any of the
following methods to surf the Internet:
Accessing the Network through the Embedded PPP Dial-Up Software
on the HG533
Accessing the Network through the PPP Dial-Up Software on Your
Computer
2.3.1 Accessing the Network through the Embedded PPP
Dial-Up Software on the HG533
If you select this method for accessing the network, the HG533 starts to set
up a dial-up connection automatically after the startup. You can access the
network after you power on your computer. You do not need to install any
special dial-up software on your computer or perform dial-up operations on
your computer.
To configure the HG533 and your computer for the network access, do as
follows:
Step 1
Verify the HG533 and the PC have connected properly, and the PC
has obtained the IP address.
Step 2
Log in to the web-based configuration utility of the HG533.
Step 3
Enable the embedded dial-up function.
1. In the navigation tree on the left of the web-based configuration
utility, choose
Basic
>
WAN
.
2. Select
Enable
for
WAN connection
.
3. Select
INTERNET
from the
Service list
.
4. Select
PPPoE
from the
Connection typ
e drop-down combo box.
Page 15 / 40
10
5. Enter the user name and password that are provided by the
network operator in the
User name
and
Password
text boxes.
6. Keep the default settings of other parameters.
7. Click
Submit
.
After completing the preceding configuration steps, you can begin browsing
the Internet.
You only need to perform the preceding operations on a computer once.
The next time you boot up your computer, you can browse the Internet
without performing the same configurations.
2.3.2 Accessing the Network through the PPP Dial-Up
Software on Your Computer
If you select this method for accessing the network, you need to install and
configure the dial-up software on your computer. In addition, you need to
perform dial-up operations on your computer upon each startup. To
configure the HG533 and your computer for the network access, do as
follows:
Step 1
Set the working mode of the HG533 to
Bridge
.
1. In the navigation tree on the left of the web-based configuration
utility, choose
Basic
>
WAN
.
2. Select
Enable
for
WAN connection
.
3. Select
INTERNET
from the
Service list
.
4. Select
Bridge
from the
Connection type
drop-down combo box.
5. Keep the default settings of other parameters.
6. Click
Submit
.
Step 2
Install and configure the PPP dial-up software on your computer.
The PPP dial-up software is pre-installed on certain computer operating
systems. To create a dial-up connection, do as follows (taking the
Windows XP operating system as an example):
1. Choose
Start
>
All
Programs
>
Accessories
>
Communications
>
Network Connections
.

Rate

4.5 / 5 based on 2 votes.

Popular Huawei Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top