Page 36 / 138
Scroll up to view Page 31 - 35
27
2-3-2 Setup procedure for ‘Fixed-IP (DSL modem)’:
Here are descriptions of every setup items:
IP address
Please input IP address assigned
assigned by your
by your service provider.
Service Provider (1):
Subnet Mask (2):
Please input subnet mask assigned by your service
provider
DNS address (3):
Please input the IP address of DNS server provided
by your service provider.
Service Provider
Please input the IP address of DNS server
Gateway Address (4): provided by your service provider.
When you finish with all settings, press ‘OK’ (5); if you want to go back
to previous menu, click ‘Back’.
2
1
3
4
5
NOTE: You can choose this Internet connection method if your
service provider assigns a fixed IP address (also known as a static
address) to you, and not using DHCP or PPPoE protocol. Please
contact your service provider for further information.
You must use the addresses provided by your Internet service
provider, wrong value settings will cause connection problems.
Page 37 / 138
28
2-3-3 Setup procedure for ‘PPPoE xDSL’:
Here are descriptions of every setup items:
User Name (1):
Please input user name assigned by your Internet
service provider here.
Password (2):
Please input the password assigned by your Internet
service provider here.
Service Name (3):
Please give a name to this Internet service, this is
optional
MTU (4):
Please input the MTU value of your network
connection here. If you don’t know, you can use
default value.
Connection
Please select the connection type of Internet
Type (5):
connection you wish to use (detailed explanation
listed below).
Idle Time Out (6):
Please input idle time out, (detailed explanation
listed below).
1
2
4
3
5
6
7
Page 38 / 138
29
When you finish with all settings, please click ‘OK’ (7); if you want to go
back to previous menu, click ‘Back’.
2-3-4 Setup procedure for ‘PPTP xDSL’:
PPTP xDSL requires two kinds of setting: WAN interface setting (setup
IP address) and PPTP setting (PPTP user name and password). Here we
start from WAN interface setting:
MTU - Please use default value if you don’t know what it is, or ask
your service provider for a proper value.
Connection Type - There are 3 options: ‘Continuous’ - keep internet
connection alive, do not disconnect, connect on Demand - only
connects to Internet when there’s a connect attempt, and ‘Manual’ -
only connects to Internet when ‘Connect’ button on this page is
pressed, and disconnects when ‘Disconnect button is pressed.
Idle Time Out: Specify the time to shutdown internet connect after no
internet activity is detected by minute. This option is only available
when connection type is ‘Connect on Demand’.
Page 39 / 138
30
Select how you obtain IP address from your service provider here. You
can choose ‘Obtain an IP address automatically’ (equal to DHCP, please
refer to ‘Cable Modem’ section above), or ‘Use the following IP address’
(i.e. static IP address).
WAN interface settings must be correctly set, or the Internet connection
will fail even if those settings of PPTP settings are correct. Please contact
your Internet service provider if you don’t know what you should fill in
these fields.
Now please go to PPTP settings section:
Here are descriptions of every setup item:
User ID (1):
Please input user ID (user name) assigned by your
Internet service provider here.
Password (2):
Please input the password assigned by your Internet
service provider here.
PPTP
Please input the IP address of PPTP gateway
Gateway (3):
assigned by your Internet service provider here.
1
2
3
4
5
6
7
8
Page 40 / 138
31
Connection
Please input the connection ID here, this is
ID (4):
optional and you can leave it blank.
MTU (5):
Please input the MTU value of your network
connection here. If you don’t know, you can use
default value.
Connection
Please select the connection type of Internet
type (6):
connection you wish to use, please refer to last
section for detailed descriptions.
Idle Time
Please input the idle time out of Internet
Out (7):
connection you wish to use, and refer to last section
for detailed descriptions
.
Setting item ‘BEZEQ-ISRAEL’ is only required to check if you’re using
the service provided by BEZEQ network in Israel.
When you finish with all settings, please click ‘OK (8); if you want to go
back to previous menu, click ‘Back’.
19216811.live