Hawking HWRN1A Router Manual PDF (Setup & Configuration Guide)

Page 51 / 138 Scroll up to view Page 46 - 50

42

optional

MTU (4):

Please input the MTU value of your network

connection here. If you don’t know, you can use

default value.

Connection

Please select the connection type of Internet

Type (5):

connection you wish to use.

Continuous – The connection will be kept always on. If

the connection is interrupted, the router will re-connect

automatically.

Connect On-Demand – Only connect when you want to

surf the Internet. “Idle Time Out” is set to stop the

connection when the network traffic is not sending or

receiving after an idle time.

Manual – After you have selected this option, you will

see the “Connect” button and “Disconnect” button,

click “’Connect” and the router will connect to the ISP.

If you want to stop the connection, please click

“Disconnect” button.

Idle Time Out (6):

If you have selected the connection type to

“Connect-On-Demand”, please input the idle time

out.

After you finish with all settings, please click ‘Apply’ (7) button and the

following message will be displayed on your web browser:

Please click ‘Continue’ to go back to previous setup menu; to continue on

other setup procedures, or click ‘Apply’ to reboot the router so the

Page 52 / 138

43

settings will take effect (Please wait for about 30 seconds while router is

rebooting).

If you want to reset all settings in this page back to previously-saved

value, please click ‘Cancel’ button.

2-5-4 Setup procedure for ‘PPTP’:

PPTP requires two kinds of setting: WAN interface setting (setup IP

address) and PPTP setting (PPTP user name and password). Here we start

from WAN interface setting:

Select the type of how you obtain IP address from your service provider

here. You can choose ‘Obtain an IP address automatically’ (equal to

DHCP, please refer to ‘Cable Modem’ section above), or ‘Use the

following IP address’ (i.e. static IP address)

WAN interface settings must be correctly set, or the Internet connection

will fail even if settings of PPTP settings are correct. Please contact your

Internet service provider if you don’t know what you should fill in these

fields.

Page 53 / 138

44

Now please go to PPTP settings section:

Here are descriptions of every setup items:

User ID (1):

Please input user ID (user name) assigned by your

Internet service provider here.

Password (2):

Please input the password assigned by your Internet

service provider here.

PPTP Gateway (3):

Please input the IP address of PPTP gateway

assigned by your Internet service provider here.

Connection ID (4):

Please input the connection ID here, this is optional

and you can leave it blank.

MTU (5):

Please input the MTU value of your network

connection here. If you don’t know, you can use

default value.

1

2

3

4

5

7

8

9

6

Page 54 / 138

45

BEZEQ-ISRAEL (6): If you are connecting to the BEZEQ network in

Israel. Please enable this function.

Connection

Please select the connection type of Internet

type (7):

connection you wish to use, please refer to section

2-5-3 for detailed descriptions.

Idle Time Out (8):

Please input the idle time out of Internet connection

you wish to use, and refer to section 2-5-3 for

detailed descriptions.

Setting item ‘BEZEQ-ISRAEL’ is only required to check if you’re using

the service provided by BEZEQ network in Israel.

When you finish with all settings, please click ‘OK (9); if you want to go

back to previous menu, click ‘Back’.

2-5-5 Setup procedure for ‘L2TP’:

Here are descriptions of every setup items:

User ID (1):

Please input user ID (user name) assigned by your

Internet service provider here.

Password (2):

Please input the password assigned by your Internet

service provider here.

1

2

4

3

5

7

6

Page 55 / 138

46

L2TP

Please input the IP address of PPTP gateway

Gateway (3):

assigned by your Internet service provider here.

MTU (4):

Please input the MTU value of your network connection

here. If you don’t know, you can use default value.

Connection

Please select the connection type of Internet connection

type (5):

you wish to use, please refer to section 2-5-3 for detailed

descriptions.

Idle Time

Please input the idle time out of Internet connection

Out (6):

you wish to use, and refer to section 2-5-3 for detailed

descriptions.

When you finish with all settings, please click ‘OK (7); if you want to go

back to previous menu, click ‘Back’.

2-5-6 Setup procedure for ‘DNS’:

If you select ‘

Dynamic IP

’ or ‘

PPPoE

’ as Internet connection method, at

least one DNS server’s IP address should be assigned automatically.

However, if you have preferred DNS server, or your service provider

didn’t assign the IP address of DNS server because of any reason, you can

input the IP address of DNS server here.

1

Rate

Popular Hawking Models

Famous Router IPs

Famous Router Companies

Bookmark Our Site

Share