Page 31 / 138 Scroll up to view Page 26 - 30
22
NOTE: If you can’t see the web management interface, and you are
being prompted to input user name and password again, it means you
didn’t input username and password correctly. Please retype user
name and password again. If you are certain that user name and
password you typed are correct, please go to ‘4-2 Troubleshooting’ to
perform a factory reset, to set the password back to default value.
TIP: This page shows the major setting categories: Setup, Wireless,
Local Network, Security, Apps and Gaming, Admin, and Status. You
can find the shortcut which leads to these setting categories at the
top of every page, and you can jump to another category directly by
clicking the link.
Page 32 / 138
23
2-3 Using ‘Quick Setup’
This router provides a ‘Quick Setup’ procedure, which will help you to
complete all required settings you need to access the Internet in very short
time. Please follow the following instructions to complete the ‘Quick
Setup’:
Please go to Quick Setup Wizard menu by clicking ‘Setup’ button.
HERE!
Page 33 / 138
24
And the following message will be displayed:
1. Set Time Zone
Here are descriptions of every setup items:
Set Time
Please press
button, a drop-down list
Zone (1):
will be shown, and you can choose a time zone of
the location you live.
Time Server
Input the IP address / host name of time server
Address (2):
here
Daylight
If the country you live uses daylight saving,
Savings(3):
please check ‘Enable Function’ box, and choose the
duration of daylight saving.
After you finish with all settings, please click ‘Next’ (4) button.
1
2
3
4
NOTE: There are several time servers available on internet:
129.6.15.28 (time-a.nist.gov)
132.163.4.101 (time-a.timefreq.bldrdoc.gov)
131.107.1.10 (time-nw.nist.gov)
If you found that the time of router is incorrect, try another time server.
Page 34 / 138
25
2. Broadband Type
Please choose the broadband (Internet connection) type you’re using and
then click ‘Next’. There are six types of Internet connection, they are:
Cable Modem
- Please go to section 2-3-1
Fixed-IP xDSL
- Please go to section 2-3-2
PPPoE xDSL
- Please go to section 2-3-3
PPTP xDSL
- Please go to section 2-3-4
If you’re not sure, please contact your Internet service provider. A wrong
Internet connection type will cause connection problems, and you will not
be able to connect to internet.
If you want to go back to previous step, please press ‘Back’ button on the
bottom of this page.
NOTE: Some service providers use ‘DHCP’ (Dynamic Host
Configuration Protocol) to assign IP address to you. In this case, you
can choose ‘Cable Modem’ as Internet connection type, even if you’re
using another connection type, like xDSL. Also, some cable modem
uses PPPoE, so you can choose ‘PPPoE xDSL’ for such cable modem
connections, even if you’re using a cable modem.
Page 35 / 138
26
2-3-1 Setup procedure for ‘Dynamic IP (Cable Modem)’:
Here are descriptions of every setup items:
Host Name (1):
Please input the host name of your computer, this is
optional, and only required if your service provider
asks you to do so.
MAC address (2):
Please input MAC address of your computer here, if
your service provider only permits computer with
certain MAC address to access internet. If you’re
using the computer which used to connect to
Internet via cable modem, you can simply press
‘Clone Mac address’ button to fill the MAC address
field with the MAC address of your computer.
After you finish with all settings, please click ‘OK’ (3) button; if you
want to go back to previous menu, click ‘Back’.
1
2
3

Rate

4.5 / 5 based on 2 votes.

Popular Hawking Models

Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top