Page 26 / 138
Scroll up to view Page 21 - 25
17
2-2-4Windows Vista IP address setup:
1. Click ‘Start’ button (it should be located at lower-left corner of your
computer), then click control panel. Click
View Network Status and
Tasks
, and then click
Manage Network Connections.
Right-click
Local
Area Network, then select ‘Properties’. Local Area Connection
Properties
window will appear, select ‘Internet Protocol Version 4 (TCP /
IPv4), and then click ‘Properties’
Page 27 / 138
18
2. Select ‘Obtain an IP address automatically’ and ‘Obtain DNS server
address automatically’, then click ‘OK’.
Page 29 / 138
20
2-2-5 Router IP address lookup
After the IP address setup is complete, please click ‘start’ -> ‘run’ at the
bottom-lower corner of your desktop:
Input ‘cmd’, then click ‘OK’
Page 30 / 138
21
Input ‘ipconfig’, then press ‘Enter’ key. Please check the IP address
followed by ‘Default Gateway’ (In this example, the IP address of router
please note that this value may be different.
)
3. Connect the router’s management interface by web browser
After your computer obtained an IP address from router, please start your
web browser, and input the IP address of router in address bar. The
following message should be shown:
Please input user name and password in the field respectively, default
user name is ‘admin’, and default password is ‘1234’, then press ‘OK’
button, and you can see the web management interface of this router:
NOTE: If the IP address of Gateway is not displayed, or the address followed
by ‘IP Address’ begins with ‘169’, please recheck network connection
between your computer and router, and / or go to the beginning of this
chapter, to recheck every step of network setup procedure.
19216811.live