Page 46 / 138
Scroll up to view Page 41 - 45
37
NOTE: When you want to manage this router from another computer
over the internet, you have to input the IP address and port number of
this router. If your Internet service provider assigns you with a static
IP address, it will not be a problem; but if the IP address your service
provider assigns to you will vary every time you establish an internet
connection, this will be a problem.
Please either ask your service provider to give you a static IP
address, or use dynamic IP to host name mapping services like
DDNS. Please refer to chapter 2-5-8 ‘DDNS client’ for details.
NOTE: Default port number the web browser will use is ‘80’. If the
‘Port’ setting in this page is not ‘80’, you have to assign the port
number in the address bar of web browser manually. For example, if
the IP address of this router is 1.2.3.4, and the port number you set is
8888, you have to input following address in the address bar of web
browser:
Page 47 / 138
38
2-5
Setup Internet Connection (Setup)
Internet connection setup can be done by using ‘Quick Setup’ menu
described in chapter 2-3.
To start configuration, please follow the instructions:
Please click ‘Setup’ tab at the top of the web management interface, and
complete the time settings and click ‘Next’. The following message will
be displayed on your web browser:
Please select an Internet connection method depending on the type of
connection you’re using.
Dynamic IP
- Please go to section 2-5-1
Fixed IP
- Please go to section 2-5-2
PPPoE
- Please go to section 2-5-3
PPTP
- Please go to section 2-5-4
DNS
- Please go to section 2-5-5
DDNS
- Please go to section 2-5-6
1
Page 48 / 138
39
2-5-1 Setup procedure for ‘Dynamic IP’:
Here are descriptions of every setup items:
Host Name (1):
Please input host name of your computer, this is
optional, and only required if your service provider
asks you to do so.
MAC Address (2):
Please input MAC address of your computer, if your
service provider only permits computer with certain
MAC address to access internet. If you’re using the
computer which used to connect to Internet via
cable modem, you can simply press ‘Clone Mac
address’ button to fill the MAC address field with
the MAC address of your computer,
After you finish with all settings, please click ‘OK’ (3); if you want to
remove a value you entered, please click ‘Back’.
After you click ‘OK’, the following message will be displayed on your
web browser:
1
2
3
Page 49 / 138
40
Please click ‘Continue’ (1) to go back to previous setup menu; to continue
on router setup, or click ‘Apply’ to reboot the router so the settings will
take effect (Please wait for about 30 seconds while router is rebooting).
2-5-2 Setup procedure for ‘Static IP’:
Here are descriptions of every setup items:
IP address assigned
Please input IP address assigned
by your Service
by your service provider.
Provider (1):
Subnet Mask (2):
Please input subnet mask assigned by your
service provider
DNS address (3):
Please input the IP address of DNS server
provided by your service provider.
Service Provider
Please input the IP address of DNS
Gateway Address (4):
server provided by your service provider.
After you finish with all settings, please click ‘Apply’ (5) button and the
following message will be displayed on your web browser:
1
2
3
4
5
Page 50 / 138
41
Please click ‘Continue’ to go back to previous setup menu; to continue on
other setup procedures, or click ‘Apply’ to reboot the router so the
settings will take effect (Please wait for about 30 seconds while router is
rebooting).
If you want to reset all settings in this page back to previously-saved
value, please click ‘Cancel’ button.
2
-5-3 Setup procedure for ‘PPPoE’:
User Name (1):
Please input user name assigned by your Internet
service provider here.
Password (2):
Please input the password assigned by your Internet
service provider here.
Service Name (3):
Please give a name to this Internet service, this is
1
2
4
3
5
6
7
19216811.live