Page 26 / 147
Scroll up to view Page 21 - 25
21
click the
Apply
button.
4.2.1
System Management
If you want to set the network time, click
Administration
>
Management
to display
the
System Management
page.
In the table of
NTP Settings
, choose your time zone, enter the NTP server address,
and set the NTP synchronization time.
After finish setting, click the
Apply
button to apply the settings, and then AP can
synchronize its time with the network time server.
4.2.2
LAN Settings
If you want to change the default IP address of the GR-534W, click the
Internet
>
LAN
to display the
Local Area Network (LAN) Settings
page.
Page 27 / 147
22
On this page, you may manually enter the IP address. It is recommended you keep
the default setting.
If you do not know the IP address of the DNS server provided by the ISP, please
Page 28 / 147
23
enable DNS Proxy and change your network setting. Assign the IP address of current
DNS server to be the LAN IP address of the GR-534W. If you use P2P software, the
UPnP function needs to be enabled.
After finishing setting, click the
Apply
button to apply the settings.
4.2.3
WAN Settings
Click
Internet
>
WAN
to display the
Wide Area Network (WAN) Settings
page.
This page provides 5 types of WAN connection modes, including STATIC (fixed IP),
DHCP (Auto config), PPPoE (ADSL), L2TP, and PPTP. On this page, select the
proper WAN connection type according to the connection types provided by your ISP,
and configure its parameters.
After finishing setting, click the
Apply
button to apply the settings.
4.2.4
Wireless Settings
Click
Wireless
>
Basic
to display the
Basic Wireless Settings
page.
Page 29 / 147
24
On this page, it provides 4 types of network modes, including 11 b/g/n mixed mode,
11 b/g mixed mode, 11 b only, and 11g only. The default network mode is 11 b/g/n
mixed mode. You can set the SSID according to your actual application. The
maximum character length is up to 32 characters.
The default channel is channel 11.
Page 30 / 147
25
After finishing setting, click the
Apply
button to apply the settings.
4.2.5
Wireless Security
Click
Wireless
>
Security
to display the
Wireless Security/Encryption Settings
page.
On this page, you can set the security mode. The security modes include Open,
Shared, WEPAUTO, WPA-Enterprise, WPA-PSK, WPA2-Enterprise, WPA2-PSK,
WPA-PSK/WPA2-PSK, WPA1/WPA2-Enterprise, and Dynamic WEP 802.1X.
After finishing setting, click the
Apply
button to apply the settings.
4.3
Quick Start in the WISP Mode
In the WISP (Wireless Internet Service Provider) mode, GR-534W works as a station,
and it can connect to another AP. All the Ethernet interfaces can access the Internet
by wireless routing. Several GR-534Ws can realize more flexible network structure.
Click
Operation Mode
to display the
Operation Mode Configuration
page.
19216811.live