Page 46 / 147
Scroll up to view Page 41 - 45
41
°
Add a Routing Rule
The parameters for adding a routing rule are described as follows:
Field
Description
Destination
The destination address of the routing rule.
Range
You may select
Host
or
Net
.
Gateway
The IP address that the routing rule passes.
Netmask
When the range is
Net
, you can set this option.
Interface
The local legal interface that the routing rule passes. You may
select
LAN
,
WAN
, or
Custom
.
Comment
Comment about the rule.
°
Current Routing Table in the System
The routing table above displays the preset rules in the system. The numbers of
Page 47 / 147
42
self-defined rules are marked with
. If you want to delete one rule, choose the rule
and then click the
Delete
button.
°
Dynamic Routing Settings
You may enable or disable the RIP function (Routing Information Protocol) here. After
enabling RIP function, AP can refresh its routing information and send RIP
information to other devices.
5.3.4
DHCP Client
Click
Internet
>
DHCP
to display the
DHCP Client List
page.
On this page, you can view the clients’ information assigned by the DHCP server,
including the MAC address, the IP address, and the lease time of the IP address and
so on.
Page 48 / 147
43
5.3.5
QoS
Click
Internet
>
QoS
to display the
Quality of Service Settings
page.
This page is used to configure the upload bandwidth of WAN interface and the QoS
rules.
The parameters on this page are described as follows:
Field
Description
Quality of
Service
Enable or disable QoS. The default QoS setting is
Disable
. After
enabling QoS, you may set the upload bandwidth of the WAN
interface.
Upload
Bandwidth
You may self-define the bandwidth, or select a proper bandwidth
in the drop down list.
After enabling QoS and setting the upload bandwidth (e.g. the upload bandwidth is
128 kbps), click the
Submit
button, and the following page appears.
Page 49 / 147
44
On this page, the group table displays 4 groups of bandwidth assignation attributes.
The new rule can join any group. If the new rule joins a group, it indicates that the
minimum and the maximum available bandwidths of the new rule are the same as the
preset values of the group that it joins.
°
Modify the Group
Click the
Modify
button of a group in the group table (e.g. NoName5 ), and the
following page appears.
The parameters on this page are described as follows:
Page 50 / 147
45
Field
Description
Group
Name
Display the group name. You may modify it if necessary.
Rate
When the data flow is large, this value shows that the minimum
bandwidth that this group can share. Its value range is between 1
and
Ceil
.
Ceil
When the data flow is small, this value shows that the maximum
bandwidth that this group can share. Its value is between 1 and
100.
°
Add a QoS Rule
Click the
Add
button on the
Quality of Service Settings
page, and the following
page appears.
The parameters on this page are described as follows:
Field
Description
Name
Set the rule name.
19216811.live