Page 41 / 147
Scroll up to view Page 36 - 40
36
On this page, enter the IP address, the subnet mask, the default gateway, and the
DNS server provided by the ISP.
After finishing setting, click the
Apply
button to apply the settings.
°
DHCP (Auto config)
On the
Wide Area Network (WAN) Settings
page, select
DHCP (Auto config)
as
the WAN connection type, and the following page appears.
If you select DHCP (Auto config), AP acquires the network parameters via the WAN
interface, such as the IP address, the subnet mask, the gateway, and the DNS server
address.
After finishing the settings, click the
Apply
button to apply the settings.
Page 42 / 147
37
°
PPPoE (ADSL)
If you want to use PPPoE service, please select
PPPoE (ADSL)
connection type. On
the
Wide Area Network (WAN) Settings
page, select
PPPoE (ADSL)
as the WAN
connection type, and the following page appears.
On this page, enter the username and the password provided by the ISP, and set the
value of the
Keep Alive
mode. You can also use the default value of the
Keep Alive
mode.
After finishing the settings, click the
Apply
button to apply the settings.
°
L2TP
If you want to use L2TP service, please select
L2TP
connection type. On the
Wide
Area Network (WAN) Settings
page, select
L2TP
as the WAN connection type, and
the following page appears.
Page 43 / 147
38
On this page, enter the server IP, the username, and the password provided by the
ISP. Set the IP address, the subnet mask, and the default gateway. When the
Address Mode
is
Dynamic
, the IP address, the subnet mask, and the default
gateway of the WAN interface are automatically assigned by the DHCP server. Set
the value of
Keep Alive
mode. You can also use the default value of the
Keep Alive
mode.
After finishing the settings, click the
Apply
button to apply the settings.
°
PPTP
If you want to use PPTP service, please select
PPTP
connection type. On the
Wide
Area Network (WAN) Settings
page, select
PPTP
as the WAN connection type, and
the following page appears.
Page 44 / 147
39
On this page, enter the server IP, the username, and the password provided by the
ISP. Set the IP address, the subnet mask, and the default gateway. When the
Address Mode
is
Dynamic
, the IP address, the subnet mask, and the default
gateway of the WAN interface are automatically assigned by the DHCP server. Set
the value of
Keep Alive
mode. You can also use the default value of the
Keep Alive
mode.
After finishing the settings, click the
Apply
button to apply the settings.
5.3.3
Advanced Routing
Click
Internet
>
Advanced Routing
to display the
Static Routing Settings
page.
Page 45 / 147
40
This page is used to manage the routing rules, view the routing table, and set the
routing RIP function.
19216811.live