Page 21 / 147
Scroll up to view Page 16 - 20
16
Step5
If you are not sure of the SSID available, please log in to the Web page of
AP, and view the SSID on the
Basic Wireless Settings
page. For more
information about the wireless settings, please refer to 5.4 Wireless
Settings (Gateway Mode).
Note:
After your wireless network card connects to AP successfully, usually, you should
set the network adapter to be
Obtain an IP address automatically.
3.5
Log In to the Web Page
Page 22 / 147
17
Open the browser, and enter
in the IE address bar.
Enter the user name (
admin
, by default) and the password (
admin
, by default) on the
login page.
After clicking the
OK
button on the login page, you can log in to the Web page
Page 23 / 147
18
4
Quick Start
4.1
Quick Start in the Bridge Mode
In the bridge mode, you may connect the LAN interfaces of the GR-534W or other
wireless devices to a LAN.
Click
Operation Mode
to display the
Operation Mode Configuration
page.
On the
Operation Mode Configuration
page, choose the
Bridge
mode, and then
click the
Apply
button.
Wireless Settings
Page 24 / 147
19
Click
Wireless
>
Basic
to display the
Basic Wireless Settings
page.
On this page, enable the radio switch and set at least one legal SSID. Make sure that
Page 25 / 147
20
the wireless devices can connect to the AP.
After finish the settings, click the
Apply
button to apply the settings.
4.2
Quick Start in the Gateway Mode
In the gateway mode, the GR-534W accesses the Internet by ADSL or cable modem,
and several users share the IP address provided by the ISP on your network.
In the gateway mode:
°
NAT is enabled.
°
WAN interface can be connected to the Internet by STATIC (fixed IP),
DHCP (Auto config), PPPoE (ADSL), L2TP, and PPTP.
If you want to configure GR-534W working in gateway mode, do as follows:
Click
Operation Mode
to display the
Operation Mode Configuration
page.
On the
Operation Mode Configuration
page, choose the
Gateway
mode, and then
19216811.live