Page 11 / 147
Scroll up to view Page 6 - 10
Page 12 / 147
7
3
Network Configuration and Introduction to
Network Connection Modes
Web management tool allows you to configure GR-534W. The recommended
browser is Internet Explorer 5.0 version or above.
The following sections describe how to set the Internet connection, local Ethernet
connection, and wireless connection, and how to access the Web page of the
GR-534W.
3.1
TCP/IP Settings
By default, the IP address of LAN interface of the GR-534W is
192.168.1.1.The
subnet mask is 255.255.255.0. The DHCP Server is enabled.
It is recommended you set the network adapter to be
Obtain an IP address
automatically
. Your PC automatically acquires IP address, subnet mask, gateway,
and DNS address via the GR-534W. If you know the setting of the current LAN
interface, you can manually set the TCP/IP properties of the network adapter, so that
your PC can communicate with the GR-534W.
You may manually set the network adapter by following the steps below:
Step1
Right click the icon of
My Network Places
(e.g., Windows XP) and select
Properties
in the menu. The
Network Connections
page appears.
Page 13 / 147
8
Step2
Right click the network adapter icon and select
Properties
in the menu.
The
Local Area Connections Properties
appears. (
Note:
If there are
several network cards on your PC, it may not display the
Local Area
Connections Properties
page. It may display other dialog boxes.
)
Step3
Double click the
Internet Protocol (TCP/IP)
to display the
Internet
Protocol (TCP/IP) Properties
page.
Page 14 / 147
9
Step4
Select
Use the following IP address
and enter the IP address of the
network adapter. The IP address should belong to the IP network segment
192.168. 1.X (X is a number between 2 and 254).
Step5
Set subnet mask and then click the
OK
button to finish manual setting.
Page 15 / 147
10
Step6
After finishing setting, you may ping the default IP address of the
GR-534W, to check whether the current connection between PC and the
GR-534W is normal. Click
RUN…
in the lower left corner on the desktop,
and then enter
ping
192.168.1.1
in the dialog box. See the following
figure:
Note:
192.168.1.1
is the default IP address of the LAN interface. If this IP address is
changed and you need to ping the IP address of the
GR-534W
, you should enter the
current IP address in the dialog box above.
Step7
If PC can ping through the default IP address of the GR-534W and the
following page appears, it indicates that the connection between PC and
the GR-534W is normal.
3.2
Introduction to PPPoE (ADSL) and DHCP (Auto
config)
19216811.live