Page 111 / 140 Scroll up to view Page 106 - 110
FRITZ!Box
111
Three-Party Conference Call
Three-Party Conference Call
FRITZ!Box allows you to hold telephone conferences with
two other people at once. Two external and one internal
party, or two internal and one external party can conduct a
conference call with each other.
You can set up a three-party conference as follows:
N
Pick up the handset.
M
Dial the external number of the first party. Talk.
R
Press the Hold button.
M
To establish a second call, simply dial
ss
plus the desired extension number for an inter-
nal call, or the desired external number.
You can now talk to the second subscriber while
your first call is on hold.
R3
Dial the sequence shown at left to begin a three-
party conference call.
D
Now all three participants can confer together. If
either of the other two parties hangs up, your
connection with the remaining participant re-
mains active.
O
You can end the three-party call by hanging up
the handset.
R2
You can also switch from the three-party call
back to the original two-party connection. Dial
the sequence shown at left. This ends the three-
party conference. The connection that was ac-
tive last before you initiated the three-party con-
ference is now active again. The other call is on
hold. You can alternate between the two connec-
tions by dialing the same sequence again.
Page 112 / 140
Call Forwarding (Call Diversion via the Central Exchange)
FRITZ!Box
112
Call Forwarding (Call Diversion via the Central Exchange)
Call forwarding is performed by the ISDN operator’s switch-
ing station. To use call forwarding, FRITZ!Box must be con-
nected to an ISDN line. Then this feature can be used to for-
ward calls to an external line. Call forwarding is subject to
charges by the network provider and cannot be used for for-
warding calls to an Internet number.
In addition to call forwarding, there is also call diversion via
FRITZ!Box. Use this kind of call diversion to divert calls to
internal and external lines. See the section “Call Diversion
over FRITZ!Box” from page 108 for more information.
Do not activate both call forwarding and call diversion at
the same time.
For call forwarding you may specify whether you want in-
coming calls to be forwarded unconditionally, after the fifth
ring, or when busy. Different settings may be configured
separately for each number.
Call Forwarding
Immediately
Incoming calls for the given MSN are always diverted imme-
diately to the specified number. Call forwarding can only be
used to forward incoming calls to an external line. Call for-
warding is subject to charges by the network provider and
cannot be used for forwarding calls to Internet numbers.
Call Forwarding Immediately for Your Extension’s Outgoing
Caller ID
N
Pick up the handset.
s21s
XNo.
r
Dial the sequence shown at left.
Q
Wait for the acknowledgement
tone.
O
Hang up the handset.
Page 113 / 140
FRITZ!Box
113
Call Forwarding (Call Diversion via the Central Exchange)
Call Forwarding Immediately for Any MSN
Call Forwarding Immediately for All MSNs
Disable Call Forwarding Immediately for Your Extension’s
Outgoing Caller ID
Disable Call Forwarding Immediately for Any MSN
N
Pick up the handset.
s21s
XNo.
s
MSN
r
Dial the sequence shown at left.
Q
Wait for the acknowledgement
tone.
O
Hang up the handset.
N
Pick up the handset.
s21s
XNo.
sr
Dial the sequence shown at left.
Q
Wait for the acknowledgement
tone.
O
Hang up the handset.
N
Pick up the handset.
s21sr
Dial the sequence shown at left.
Q
Wait for the acknowledgement
tone.
O
Hang up the handset.
N
Pick up the handset.
s21ss
MSN
r
Dial the sequence shown at left.
Q
Wait for the acknowledgement
tone.
O
Hang up the handset.
Page 114 / 140
Call Forwarding (Call Diversion via the Central Exchange)
FRITZ!Box
114
Disable Call Forwarding Immediately for All MSNs
Call Forwarding
When Busy
Incoming calls are only forwarded to the specified number
if the extension dialed is busy. You can define call diversion
for the local outgoing call number. The local outgoing call
number is the first number you assigned to an extension.
You can also define call diversion for any other number, e.g.
a telephone at the other extension of FRITZ!Box, or for all
numbers. All settings can be disabled at any time.
Call Forwarding When Busy for Your Extension’s Outgoing
Caller ID
Call Forwarding When Busy for Any MSN
N
Pick up the handset.
s21ssr
Dial the sequence shown at left.
Q
Wait for the acknowledgement
tone.
O
Hang up the handset.
N
Pick up the handset.
s67s
XNo.
r
Dial the sequence shown at left.
Q
Wait for the acknowledgement
tone.
O
Hang up the handset.
N
Pick up the handset.
s67s
XNo.
s
MSN
r
Dial the sequence shown at left.
Q
Wait for the acknowledgement
tone.
O
Hang up the handset.
Page 115 / 140
FRITZ!Box
115
Call Forwarding (Call Diversion via the Central Exchange)
Call Forwarding When Busy for All MSNs
Disable Call Forwarding When Busy for Your Extension’s
Outgoing Caller ID
Disable Call Forwarding When Busy for Any MSN
Disable Call Forwarding When Busy for All MSNs
N
Pick up the handset.
s67s
XNo.
sr
Dial the sequence shown at left.
Q
Wait for the acknowledgement
tone.
O
Hang up the handset.
N
Pick up the handset.
s67sr
Dial the sequence shown at left.
Q
Wait for the acknowledgement
tone.
O
Hang up the handset.
N
Pick up the handset.
s67ss
MSN
r
Dial the sequence shown at left.
Q
Wait for the acknowledgement
tone.
O
Hang up the handset.
N
Pick up the handset.
s67ssr
Dial the sequence shown at left.
Q
Wait for the acknowledgement
tone.
O
Hang up the handset.

Rate

4.5 / 5 based on 2 votes.

Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top