FRITZ WLAN-7170 Router Manual PDF (Setup & Configuration Guide)

Home

Manuals

FRITZ

WLAN-7170

Page 101 / 140 Scroll up to view Page 96 - 100

FRITZ!Box

101

Group Call

The Group Call feature of FRITZ!Box allows you to ring all

other extensions at the same time. To do so, you must first

configure the extension for internal dialing. Your call is con-

nected with whichever extension answers first.

Picking up a Call from the Answering Machine

You can use this function to pick up incoming calls on your

telephone after they have been accepted by the answering

machine at a different extension. The other extension must

be configured as an answering machine in the FRITZ!Box.

To pick up a call from another extension, proceed as follows:

Pick up the handset.

Instead of an extension number, dial “9”. All ex-

tensions that are not busy ring.

Pick up the handset.

s09

Dial the sequence shown at left.

The call is now connected to your extension, and

you can talk with the caller.

Page 102 / 140

Alternating Between Calls

FRITZ!Box

102

Alternating Between Calls

Whenever you have one active connection and one caller

on hold, you can switch from one call to the other as often

as you want using the Hold button.

To alternate between two connections, proceed as follows:

The alternating connections can be ended in a number of

ways:

Call 1

You are talking to Caller 1.

Press the Hold button. Caller 1 is now on hold.

To establish a second call, simply dial

plus

the desired extension number for an internal call,

or the desired external number.

Call 2

If the call is answered, you can consult on this line.

The original caller is still on hold.

To switch back from Caller 2 to Caller 1, dial the se-

quence shown at left.

Call 1

Caller 1 is now active again and Caller 2 is on hold.

To switch back again from Caller 2 to Caller 1, dial

the same sequence. In this way you can alternate

between the two connections.

The caller on hold hangs up. You can continue talk-

ing on the active connection.

You end the active connection by dialing the se-

quence shown at left. The call that was on hold is

now active again, and there is no call left on hold.

Call

You can also return to the call on hold by hanging

up the handset: this ends the currently active con-

nection. In this case the phone rings as soon as

you hang up. Pick up the handset again to return to

the last call that was on hold.

Page 103 / 140

FRITZ!Box

103

Consultation / Hold

The “Consultation/Hold” feature allows you to place an ex-

isting call on hold. You then may consult with someone else

at your workplace or dial a second call. The party on hold

does not hear the second conversation. Once you have fin-

ished the consultation, you can return to the original con-

nection.

To place a call on hold and then reactivate it, proceed as

follows:

If you return to Caller 1 by pressing the Hold button, the

connection to Caller 2 is not cleared down until Caller 2

hangs up. Connection charges continue to accrue.

Call 1

You are talking to Caller 1.

Press the Hold button. Call 1 is now on hold and

you can consult someone else.

To establish a second call, simply dial

plus

the desired extension number for an internal call,

or the desired external number.

Call 2

If the call is answered, you can consult on this line.

The original caller is still on hold.

If the Caller 2’s line is busy or the call is not an-

swered, press the Hold button again to return to

Caller 1.

To switch back to Caller 2 after talking to Caller 1,

dial the sequence shown at left. Call 1 is now ac-

tive again.

Call 1

You can also return to Caller 1 by hanging up the

handset: this ends the connection to Caller 2. In

this case, your phone rings as soon as you hang

up. Pick up the handset to return to Caller 1 again.

Hang up the handset to end the connection.

Page 104 / 140

Transferring Calls

FRITZ!Box

104

Transferring Calls

The “Call Transfer” function allows you to transfer a connec-

tion from one of FRITZ!Box’s extensions to the other. To do

so, proceed as follows:

12.2

Configuring by Telephone

Restoring Factory Settings

The FRITZ!Box can be reset to its condition upon delivery.

All settings you made in the FRITZ!Box—including the con-

figured Internet connection—are then deleted.

After restoring factory settings, the FRITZ!Box is restarted.

Call 1

You are talking to Caller 1.

Press the Hold button. Caller 1 is now on hold.

ssM

To establish a connection to Caller 2, dial the star

key twice and then her or his extension number.

Call 2

You can now talk with Caller 2.

To transfer Caller 1 to Caller 2, simply hang up the

handset.

r991s15901590s

resets FRITZ!Box to its

condition upon delivery

Page 105 / 140

FRITZ!Box

105

Saving New Settings

In this section, saving refers to all current settings. It is not

necessary to save the configuration after each setting is

made. You may first configure all of your FRITZ!Box’s set-

tings as desired, and then save them permanently.

Saving Permanently

Permanent saving cannot be reversed. However, you can re-

set the PBX to its factory settings or program it with differ-

ent settings.

Disabling Automatic Outside Dialing

Call Waiting Option

Call waiting can be switched on or off for each extension.

Some older terminal equipment connected to extensions

may misinterpret the call waiting signal. This is especially

true of fax machines and modems. If communication errors

occur, you should disable call waiting for fax and modem

extensions.

See section “Call Waiting” on page 121 for information

about how to accept a call while another connection is ac-

tive.

Pick up the handset.

r91ss

Save all settings made to your FRITZ!Box perma-

nently by dialing the sequence shown at left.

Hang up the handset.

Pick up the handset.

Ext.

s0s

Dial the sequence shown at left.

r91ss

Save your settings if desired by

dialing the sequence shown at

left.

Hang up the handset.

Rate

Popular FRITZ Models

Famous Router IPs

Famous Router Companies

Bookmark Our Site

Share