Page 106 / 140 Scroll up to view Page 101 - 105
Call Rejection on Busy (Busy on Busy)
FRITZ!Box
106
When “Call Waiting” is enabled, modem and fax connec-
tions may be interrupted.
Disabling Call Waiting
Enabling Call Waiting
Call Rejection on Busy (Busy on Busy)
Calls for an extension can be rejected using the “Busy on
Busy” feature. This means that the user receives a busy sig-
nal whenever the extension is busy.
Enabling the Busy on Busy Function
N
Pick up the handset.
r2
Ext.
s1s
Dial the sequence shown at left.
r91ss
Save your settings if desired by
dialing the sequence shown at
left.
O
Hang up the handset.
N
Pick up the handset.
r2
Ext.
s0s
Dial the sequence shown at left.
r91ss
Save your settings if desired by
dialing the sequence shown at
left.
O
Hang up the handset.
N
Pick up the handset.
r52
Ext.
s1s
Dial the sequence shown at left.
Type in the number of the exten-
sion in the “Ext.” field.
r91ss
Save your settings if desired by
dialing the sequence shown at
left.
O
Hang up the handset.
Page 107 / 140
FRITZ!Box
107
Room Monitoring (Baby Monitor)
Disabling the Busy on Busy Function
Room Monitoring (Baby Monitor)
The following key combination enables the function for
monitoring the sound level in a room. First enter the volume
level (a value between 1 and 8). Enter a telephone number.
Do not hang up the handset! When the volume in the room
reaches the specified level, the number you entered will be
dialed. When the telephone rings and you pick up the
handset, you will be connected with the telephone on
which you enabled the room monitoring function.
When using this feature, it is advisable to activate the
speaker phone function.
N
Pick up the handset.
r52
Ext.
s0s
Dial the sequence shown at left.
Type in the number of the exten-
sion in the “Ext.” field.
r91ss
Save your settings if desired by
dialing the sequence shown at
left.
O
Hang up the handset.
Page 108 / 140
Advanced Features
FRITZ!Box
108
You can disable the function by simply hanging up the
handset of the telephone at which you enabled it.
Dial the number of the extension to listen in at an extension
with room monitoring activated.
After initiating a room monitoring phone call, the PBX can-
not generate a new call until at least one minute has
lapsed.
12.3
Advanced Features
Call Diversion over FRITZ!Box
Incoming calls to the FRITZ!Box telephones can be diverted
to a different extension or to an external number. In con-
trast to call diversion over FRITZ!Box, there is also call for-
warding (call diversion via the central exchange). How to
use call forwarding by phone is described in the section
“Call Forwarding (Call Diversion via the Central Exchange)”
from page 112.
Do not activate both call forwarding and call diversion at
the same time.
Call diversion over FRITZ!Box allows you to forward calls to
an external line or to another extension. This kind of diver-
sion is organized inside FRITZ!Box so that diversions to an-
N
Pick up the handset or activate
the speaker phone function of
your telephone.
s4
<level>
s
<number>
r
Dial the sequence shown at left.
For “level”, enter a number be-
tween “1” (the most sensitive
sound level) and “8”. For “num-
ber”, enter the number to be
called. This may be the number
of another internal extension, a
“9” for
Q
Wait for the acknowledgement
tone. The baby monitoring phone
function is now enabled.
Do
not
hang up the handset!
Page 109 / 140
FRITZ!Box
109
Call Diversion over FRITZ!Box
other extension are free of charge. Calls are diverted to an
external number over your ISDN line’s second B channel
and are subject to normal transmission charges. If the
FRITZ!Box is operated on an analog telephone line, incom-
ing calls can only be diverted to a different extension or to
numerical Internet numbers.
You can specify the conditions under which an incoming
call will be diverted over FRITZ!Box. You can select one of
six different options. Different settings may be saved for
each extension.
Note that only numerical Internet numbers can be entered
for diversion to an Internet number.
Call Diversion Immediately (Without Ringing)
Call Diversion After the Third Ring
Call Diversion When Busy
N
Pick up the handset.
r41
Ext.
s
XNo./Ext.
s
Dial the sequence shown at left.
r91ss
Save your settings if desired by
dialing the sequence shown at
left.
O
Hang up the handset.
N
Pick up the handset.
r42
Ext.
s
XNo./Ext.
s
Dial the sequence shown at left.
r91ss
Save your settings if desired by
dialing the sequence shown at
left.
O
Hang up the handset.
N
Pick up the handset.
r43
Ext.
s
XNo./Ext.
s
Dial the sequence shown at left.
r91ss
Save your settings if desired by
dialing the sequence shown at
left.
O
Hang up the handset.
Page 110 / 140
Using FRITZ!Box Features on the Analog Line
FRITZ!Box
110
Call Diversion After the Third Ring or When Busy
Call Diversion Immediately by Ringing
Disabling Call Diversion
Using FRITZ!Box Features on the Analog Line
When FRITZ!Box is connected to an analog line, a feature
can be activated directly at the switching station only if the
line is set for this kind of configuration.
N
Pick up the handset.
r44
Ext.
s
XNo./Ext.
s
Dial the sequence shown at left.
r91ss
Save your settings if desired by
dialing the sequence shown at
left.
O
Hang up the handset.
N
Pick up the handset.
r45
Ext.
s
XNo./Ext.
s
Dial the sequence shown at left.
r91ss
Save your settings if desired by
dialing the sequence shown at
left.
O
Hang up the handset.
N
Pick up the handset.
r40
Ext.
ss
Dial the sequence shown at left.
r91ss
Save your settings if desired by
dialing the sequence shown at
left.
O
Hang up the handset.
N
Pick up the handset.
sr
<feature>
Dial the sequence shown at left.
Next, enter the keyboard se-
quence your network provider
has defined for the desired fea-
ture. The given keyboard se-
quence must be obtained from
your network provider.

Rate

4.5 / 5 based on 2 votes.

Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top