Page 96 / 140 Scroll up to view Page 91 - 95
Operation by Telephone
FRITZ!Box
96
12.1
Operation by Telephone
This section describes how you can use the FRITZ!Box fea-
tures via your telephone keypad.
Shortening the Dialing Procedure
FRITZ!Box automatically recognizes when a number has
been entered, but not until a few seconds after the final
digits are entered.
To shorten the dialing procedure, enter the “#” character af-
ter the last digit of a number.
Enabling/Disabling WLAN
The WLAN function of FRITZ!Box can be switched on and off
using the telephone keypad. This is especially comfortable
when the WLAN function has been switched off. Simply use
your telephone to turn it back on. This means that the
WLAN function can be enabled without having use a wired
connection to open the FRITZ!Box user interface.
Do Not Disturb
You can enable the Do Not Disturb function for any tele-
phone connected to FRITZ!Box in the user interface. When
Do Not Disturb is enabled, the telephone will not ring.
Enabling Do Not Disturb Effective Immediately
Use the following combination of keys to enable Do Not Dis-
turb on an extension immediately. Do Not Disturb will re-
main enabled until you disable it.
<number>
r
indicates to FRITZ!Box that the number can be
dialed immediately, thus shortening the dial-
ing procedure
r96s1s
enables the WLAN function of FRITZ!Box
r96s0s
disables the WLAN function of FRITZ!Box
r81
<Ext.>
s0s
immediately enables Do Not Disturb for
extension entered as Ext.
Page 97 / 140
FRITZ!Box
97
Do Not Disturb
Enabling Do Not Disturb for a Prescribed Period
On any extension you can enter a Do Not Disturb period
during which the telephone will not ring.
At the extension for which a Do Not Disturb period is to be
configured, define the period during which the phone
should not ring and save your entries. Then enable Do Not
Disturb. Do Not Disturb will be switched on daily at the time
entered in the “Start” field and switched off again at the
time defined in the “End” field.
Example: Do Not Disturb should be configured from 20:00
p.m. until 07:00 a.m. daily. Enter the value 2000 for <Start>
and 0700 for End.
Disabling Do Not Disturb
r80
<Ext.>
s
<Start>
s
<End>
s
defines the period for Do Not Disturb at
extension Ext.
r91ss
saves the settings in the FRITZ!Box
r81
<Ext.>
s1s
enables Do Not Disturb for the defined
period
r81
<Ext.>
s6s
disables Do Not Disturb for extension
Ext.
Page 98 / 140
Alarm
FRITZ!Box
98
Alarm
The FRITZ!Box includes an alarm clock function. The alarm
clock can be configured individually for each connected
telephone.
Configuring the Alarm for a Telephone
First enter on the telephone the time at which you would
like to be awoken and save this entry. Then enable the
alarm function.
Example: The telephone should ring to wake you at 07:00
a.m. Enter the value 0700 as <Time>.
Enabling/Disabling the Alarm Function
Selecting the Outgoing Number and the Type of Connection
For outgoing connections you can specify the kind of con-
nection that should be used. For this entry you can use set-
tings already made in FRITZ!Box or circumvent the settings
currently configured in FRITZ!Box.
Defining the Connection Type
You have the option of specifying the type of outgoing con-
nection, independent of the settings configured in the
FRITZ!Box. In this case the dialing rules are suspended for
r881s
<Time>
s
<Ext.>
s
defines for the extension Ext. the
time at which the telephone
should ring
r91ss
saves the settings in the
FRITZ!Box
r881ss
enables the alarm function for all extensions
on which a time was configured
r881r
disables the alarm function for all extensions
Page 99 / 140
FRITZ!Box
99
Selecting the Outgoing Number and the Type of Connection
the given dialing procedure. To do this, enter one of the fol-
lowing keypad codes before dialing a number on your tele-
phone:
Establishing a Connection Using a Selected Internet Number
By placing an Internet Number ID before the number you
can specify which of your Internet numbers should be used
to conduct a telephone call.
If you enter an Internet number in the FRITZ!Box user inter-
face, an ID for the Internet number is created automatically.
The Internet Number ID is displayed in the “Telephony / In-
ternet Telephony” menu of the user interface, in the “Inter-
net Number ID” column of the list of Internet numbers.
s111r
<number>
dials up this connection using the fixed line
s12r
<number>
dials up this connection using the Internet (In-
ternet number for access 1
s12
P
r
establishes an Internet connection for a select-
ed Internet number. For “P”, enter the position
of the Internet number in the “List of Internet
Numbers”
<Internet Num-
ber ID> <num-
ber>
establishes a connection for this call using the
Internet number specified by the <Internet Num-
ber ID>
Page 100 / 140
Making Internal Calls
FRITZ!Box
100
Making Internal Calls
All calls conducted between telephones connected to the
FRITZ!Box Fon WLAN 7170, be they analog or ISDN/DECT
phones, are internal telephone calls. These calls are free of
charge.
Dialing Internal Calls with Automatic Outside Dialing
Dialing Internal Calls without Automatic Outside Dialing
N
Pick up the handset. You hear the external dial
tone immediately, since the extension is set for
automatic outside dialing.
R
or
ss
Press the Hold button, or press the asterisk key
twice. You now hear the internal dial tone.
M1
or
2
or
M50
or
M5
MSN
r
°
Dial “1” or “2” to call the connected analog
telephones.
°
Dial “50” to call all of the ISDN telephones
for which no number is configured.
°
Dial an MSN to call the ISDN telephones
whose numbers are configured as this MSN.
N
Pick up the handset. You hear the internal dial
tone.
M1
or
2
or
M50
or
M5
MSN
r
°
Dial “1” or “2” to call the connected analog
telephones.
°
Dial “50” to call all of the ISDN telephones
for which no number is configured.
°
Dial an MSN to call the ISDN telephones
whose numbers are configured as this MSN.

Rate

4.5 / 5 based on 2 votes.

Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top