Page 41 / 794 Scroll up to view Page 36 - 40
Vigor2860 Series User’s Guide
27
1.7.4 GUI Map
All the functions the router supports are listed with table clearly in this page. Users can click
the function link to access into the setting page of the function for detailed configuration.
Click the icon on the top of the main screen to display all the functions.
Page 42 / 794
Vigor2860 Series User’s Guide
28
1.7.5 Web Console
It is not necessary to use the telnet command via DOS prompt. The changes made by using
web console have the same effects as modified through web user interface. The
functions/settings modified under Web Console also can be reviewed on the web user
interface.
Click the
Web Console
icon on the top of the main screen to open the following screen.
Page 43 / 794
Vigor2860 Series User’s Guide
29
1.7.6 Config Backup
There is one way to store current used settings quickly by clicking the
Config Backup
icon. It
allows you to backup current settings as a file. Such configuration file can be restored by using
System Maintenance>>Configuration Backup
.
Simply click the icon on the top of the main screen and a pop up dialog will appear.
Click
Save
to store the setting.
1.7.7 Logout
Click this icon to exit the web user interface.
1.8 Online Status
1.8.1 Physical Connection
Such page displays the physical connection status such as LAN connection status, WAN
connection status, ADSL information, and so on.
Page 44 / 794
Vigor2860 Series User’s Guide
30
Physical Connection for IPv4 Protocol
Physical Connection for IPv6 Protocol
Page 45 / 794
Vigor2860 Series User’s Guide
31
Detailed explanation (for IPv4) is shown below:
Item
Description
LAN Status
Primary DNS-
Displays the primary DNS server address
for WAN interface.
Secondary DNS -
Displays the secondary DNS server
address for WAN interface.
IP Address
-Displays the IP address of the LAN interface.
TX Packets
-Displays the total transmitted packets at the
LAN interface.
RX Packets
-Displays the total received packets at the LAN
interface.
WAN1/WAN2/WAN3
/WAN4 Status
Enable – Yes
in red means such interface is available but
not enabled.
Yes
in green means such interface is enabled.
Line
– Displays the physical connection (VDSL, ADSL,
Ethernet, or USB) of this interface.
Name
– Display the name of the router.
Mode
- Displays the type of WAN connection (e.g.,
PPPoE).
Up Time
- Displays the total uptime of the interface.
IP
- Displays the IP address of the WAN interface.
GW IP
- Displays the IP address of the default gateway.
TX Packets
- Displays the total transmitted packets at the
WAN interface.
TX Rate
- Displays the speed of transmitted octets at the
WAN interface.
RX Packets
- Displays the total number of received packets
at the WAN interface.
RX Rate
- Displays the speed of received octets at the
WAN interface.
Detailed explanation (for IPv6) is shown below:
Item
Description
LAN Status
IP Address
- Displays the IPv6 address of the LAN
interface..
TX Packets
-Displays the total transmitted packets at the
LAN interface.
RX Packets
-Displays the total received packets at the LAN
interface.
TX Bytes
- Displays the speed of transmitted octets at the
LAN interface.
RX Bytes
- Displays the speed of received octets at the
LAN interface.
WAN IPv6 Status
Enable – No
in red means such interface is available but
not enabled.
Yes
in green means such interface is enabled.
No in red means such interface is not available.

Rate

4 / 5 based on 1 vote.

Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top