Page 56 / 794 Scroll up to view Page 51 - 55
Vigor2860 Series User’s Guide
42
2.1.2 For WAN2 (Ethernet)
WAN2 is dedicated to physical mode in Ethernet. If you choose WAN2, please specify
physical type. Then, click
Next
.
Available settings are explained as follows:
Item
Description
Display Name
Type a name for the router.
VLAN Tag insertion
The settings configured in this field are available for WAN1
and WAN2.
Enable
– Enable the function of VLAN with tag.
The router will add specific VLAN number to all packets on
the WAN while sending them out.
Please type the tag value and specify the priority for the
packets sending by WAN1.
Disable
– Disable the function of VLAN with tag.
Tag value
– Type the value as the VLAN ID number. The
range is form 0 to 4095.
Priority
– Type the packet priority number for such VLAN.
The range is from 0 to 7.
On the next page as shown below, please select the appropriate Internet access type according
to the information from your ISP. For example, you should select PPPoE mode if the ISP
provides you PPPoE interface. Then click
Next
for next step.
Page 57 / 794
Vigor2860 Series User’s Guide
43
PPPoE
1.
Choose
WAN2
as the WAN Interface
and click the
Next
button. The following page will
be open for you to specify Internet Access Type.
2.
Click
PPPoE
as the Internet Access Type. Then click
Next
to continue.
Available settings are explained as follows:
Item
Description
Service Name
(Optional)
Enter the description of the specific network service.
Username
Assign a specific valid user name provided by the ISP.
Note:
The maximum length of the user name you can set is
63 characters.
Password
Assign a valid password provided by the ISP.
Note:
The maximum length of the password you can set is 62
Page 58 / 794
Vigor2860 Series User’s Guide
44
Item
Description
characters.
Confirm Password
Retype the password.
Back
Click it to return to previous setting page.
Next
Click it to get into the next setting page.
Cancel
Click it to give up the quick start wizard.
3.
Please manually enter the Username/Password provided by your ISP. Click
Next
for
viewing summary of such connection.
4.
Click
Finish.
A page of
Quick Start Wizard Setup OK!!!
will appear.
Then, the system
status of this protocol will be shown.
5.
Now, you can enjoy surfing on the Internet.
Page 59 / 794
Vigor2860 Series User’s Guide
45
PPTP/L2TP
1.
Choose
WAN2
as the WAN Interface
and click the
Next
button. The following page will
be open for you to specify Internet Access Type.
2.
Click
PPTP/L2TP
as the Internet Access Type. Then click
Next
to continue.
Available settings are explained as follows:
Item
Description
User Name
Assign a specific valid user name provided by the ISP.
Note:
The maximum length of the user name you can set is
63 characters.
Password
Assign a valid password provided by the ISP.
Page 60 / 794
Vigor2860 Series User’s Guide
46
Note:
The maximum length of the password you can set is 62
characters.
Confirm Password
Retype the password.
WAN IP
Configuration
Obtain an IP address automatically
– the router will get an
IP address automatically from DHCP server.
Specify an IP address
– you have to type relational settings
manually.
IP Address
- Type the IP address.
Subnet Mask
–Type the subnet mask.
Gateway – Type the IP address of the gateway.
Primary DNS
–Type in the primary IP address for the router.
Second DNS
–Type in secondary IP address for necessity in
the future.
PPTP Server / L2TP
Server
Type the IP address of the server.
Back
Click it to return to previous setting page.
Next
Click it to get into the next setting page.
Cancel
Click it to give up the quick start wizard.
3.
Please type in the IP address/mask/gateway information originally provided by your ISP.
Then click
Next
for viewing summary of such connection.
4.
Click
Finish.
A page of
Quick Start Wizard Setup OK!!!
will appear.
Then, the system
status of this protocol will be shown.
5.
Now, you can enjoy surfing on the Internet.

Rate

4 / 5 based on 1 vote.

Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top