Page 61 / 794 Scroll up to view Page 56 - 60
Vigor2860 Series User’s Guide
47
Static IP
1.
Choose
WAN2
as the WAN Interface
and click the
Next
button. The following page will
be open for you to specify Internet Access Type.
2.
Click
Static IP
as the Internet Access type. Simply click
Next
to continue.
Available settings are explained as follows:
Item
Description
WAN IP
Type the IP address.
Subnet Mask
Type the subnet mask.
Gateway
Type the IP address of gateway.
Primary DNS
Type in the primary IP address for the router.
Secondary DNS
Type in secondary IP address for necessity in the future.
Back
Click it to return to previous setting page.
Page 62 / 794
Vigor2860 Series User’s Guide
48
Next
Click it to get into the next setting page.
Cancel
Click it to give up the quick start wizard.
3.
Please type in the IP address information originally provided by your ISP. Then click
Next
for next step.
4.
Click
Finish.
A page of
Quick Start Wizard Setup OK!!!
will appear.
Then, the system
status of this protocol will be shown.
5.
Now, you can enjoy surfing on the Internet.
DHCP
1.
Choose
WAN2
as WAN Interface
and click the
Next
button. The following page will be
open for you to specify Internet Access Type.
Page 63 / 794
Vigor2860 Series User’s Guide
49
2.
Click
DHCP
as the Internet Access type. Simply click
Next
to continue.
Available settings are explained as follows:
Item
Description
Host Name
Type the name of the host.
Note:
The maximum length of the host name you can set is
39 characters.
MAC
Some Cable service providers specify a specific MAC
address for access authentication. In such cases you need to
enter the MAC address.
Back
Click it to return to previous setting page.
Next
Click it to get into the next setting page.
Cancel
Click it to give up the quick start wizard.
3.
After finished the settings above, click
Next
for viewing summary of such connection.
Page 64 / 794
Vigor2860 Series User’s Guide
50
4.
Click
Finish.
A page of
Quick Start Wizard Setup OK!!!
will appear.
Then, the system
status of this protocol will be shown.
5.
Now, you can enjoy surfing on the Internet.
Page 65 / 794
Vigor2860 Series User’s Guide
51
2.1.3 For WAN3/WAN4 (USB)
WAN3/WAN4 is dedicated to physical mode in USB.
1.
Choose
WAN3/WAN4
as WAN Interface.
2.
Then, click
Next
for getting the following page.
Available settings are explained as follows:
Item
Description
Internet Access
Choose one of the selections as the protocol of accessing the
internet.
3G/4G USB Modem
(PPP mode)
SIM Pin code
–Type PIN code of the SIM card that will be
used to access Internet. The maximum length of the pin code
you can set is 15 characters.
Modem Initial String
– Such value is used to initialize USB
modem. Please use the default value. If you have any

Rate

4 / 5 based on 1 vote.

Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top