Page 51 / 794
Scroll up to view Page 46 - 50
Vigor2860 Series User’s Guide
37
PPPoE/PPPoA
1.
Choose
WAN1
as WAN Interface
and click the
Next
button; you will get the following
page.
Available settings are explained as follows:
Item
Description
Protocol
There are two modes offered for you to choose for WAN1
interface.
Choose
PPPoE/PPPoA
as the protocol.
For ADSL Only
Such field is provided for ADSL only. You have to choose
encapsulation and type the values for VPI and VCI. Or, click
Auto detect
to find out the best values.
Fixed IP
Click
Yes
to enable Fixed IP feature.
IP Address
Type the IP address if
Fixed IP
is enabled.
Subnet Mask
Type the subnet mask.
Default Gateway
Type the IP address as the default gateway.
Primary DNS
Type in the primary IP address for the router.
Page 52 / 794
Vigor2860 Series User’s Guide
38
Secondary DNS
Type in secondary IP address for necessity in the future.
Back
Click it to return to previous setting page.
Next
Click it to get into the next setting page.
Cancel
Click it to give up the quick start wizard.
2.
After finished the above settings, simply click
Next.
Manually enter the
Username/Password provided by your ISP
Available settings are explained as follows:
Item
Description
Service Name
(Optional)
Enter the description of the specific network service.
Username
Assign a specific valid user name provided by the ISP.
Note:
The maximum length of the user name you can set is
63 characters.
Password
Assign a valid password provided by the ISP.
Note:
The maximum length of the password you can set is 62
characters.
Confirm Password
Retype the password.
Back
Click it to return to previous setting page.
Next
Click it to get into the next setting page.
Cancel
Click it to give up the quick start wizard.
Page 53 / 794
Vigor2860 Series User’s Guide
39
3.
After finished the above settings, click
Next
for viewing summary of such connection.
4.
Click
Finish.
A page of
Quick Start Wizard Setup OK!!!
will appear.
Then, the system
status of this protocol will be shown.
5.
Now, you can enjoy surfing on the Internet.
Page 54 / 794
Vigor2860 Series User’s Guide
40
MPoA / Static or Dynamic IP
1.
Choose
WAN1
as WAN Interface
and click the
Next
button; you will get the following
page.
Available settings are explained as follows:
Item
Description
Protocol
There are two modes offered for you to choose for WAN1
interface.
Choose
MPoA / Static or Dynamic IP
as the protocol.
For ADSL Only
Such field is provided for ADSL only. You have to choose
encapsulation and type the values for VPI and VCI. Or, click
Auto detect
to find out the best values.
Fixed IP
Click
Yes
to enable Fixed IP feature.
IP Address
Type the IP address if
Fixed IP
is enabled.
Subnet Mask
Type the subnet mask.
Page 55 / 794
Vigor2860 Series User’s Guide
41
Default Gateway
Type the IP address as the default gateway.
Primary DNS
Type in the primary IP address for the router.
Secondary DNS
Type in secondary IP address for necessity in the future.
Back
Click it to return to previous setting page.
Next
Click it to get into the next setting page.
Cancel
Click it to give up the quick start wizard.
2.
Please type in the IP address/mask/gateway information originally provided by your ISP.
Then click
Next
for viewing summary of such connection.
3.
Click
Finish.
A page of
Quick Start Wizard Setup OK!!!
will appear.
Then, the system
status of this protocol will be shown.
4.
Now, you can enjoy surfing on the Internet.
19216811.live