Page 36 / 794 Scroll up to view Page 31 - 35
Vigor2860 Series User’s Guide
22
4.
Now, the
Main Screen
will appear.
Note:
The home page will be different slightly in accordance with the type of the
router you have.
5.
The web page can be logged out according to the chosen condition. The default setting is
Auto Logout
, which means the web configuration system will logout after 5 minutes
without any operation. Change the setting for your necessity.
1.6 Changing Password
Please change the password for the original security of the router.
1.
Open a web browser on your PC and type
A pop-up window will
open to ask for username and password.
2.
Please type “admin/admin” as Username/Password for accessing into the web user
interface with admin mode.
3.
Go to
System
Maintenance
page and choose
Administrator Password
.
Page 37 / 794
Vigor2860 Series User’s Guide
23
4.
Enter the login password (the default is “admin”) on the field of
Old Password
. Type
New Password
and
Confirm Password
. Then click
OK
to continue.
Note:
The maximum length of the password you can set is 23 characters.
5.
Now, the password has been changed. Next time, use the new password to access the
Web user interface for this router.
Note:
Even the password is changed, the Username for logging onto the web user
interface is still “admin”.
Page 38 / 794
Vigor2860 Series User’s Guide
24
1.7 Introducing Dashboard
Dashboard shows the connection status including System Information, IPv4 Internet Access,
IPv6 Internet Access, Interface (physical connection), Security and Quick Access.
Click
Dashboard
from the main menu on the left side of the main page.
A web page with default selections will be displayed on the screen. Refer to the following
figure:
1.7.1 Virtual Panel
On the top of the Dashboard, a virtual panel (simulating the physical panel of the router)
displays the physical interface connection. It will be refreshed every five seconds. When you
move and click the mouse cursor on LEDs (except ACT), USB ports, VDSL/ADSL, WAN2,
or LAN1 – LAN6, related web setting page will be open for you to configure if required.
For detailed information about the LED display, refer to
1.2 LED Indicators and
Connectors
.
Page 39 / 794
Vigor2860 Series User’s Guide
25
1.7.2 Name with a Link
A name with a link (e.g., Router Name
, Current Time
, WAN1~4
and etc.) below means you
can click it to open the configuration page for modification.
1.7.3 Quick Access for Common Used Menu
All the menu items can be accessed and arranged orderly on the left side of the main page for
your request. However, some
important
and
common
used menu items which can be
accessed in a quick way just for convenience.
Look at the right side of the Dashboard. You will find a group of common used functions
grouped under
Quick Access
.
The function links of System Status, Dynamic DDNS, TR-069, User Management, IM/P2P
Block, Schedule, Syslog/Mail Alert, LDAP, RADIUS, Firewall Object Setting and Data Flow
Monitor are displayed here. Move your mouse cursor on any one of the links and click on it.
The corresponding setting page will be open immediately.
In addition, quick access for VPN security settings such as
Remote Dial-in User
and
LAN to
LAN
are located on the bottom of this page. Scroll down the page to find them and use them if
required.
Page 40 / 794
Vigor2860 Series User’s Guide
26
Note that there is a plus (
) icon located on the left side of VPN/LAN. Click it to review the
VPN connection(s) used presently.
Host connected physically to the router via LAN port(s) will be displayed with green circles in
the field of Connected.
All of the hosts (including wireless clients) displayed with Host ID, IP Address and MAC
address indicates that the traffic would be transmitted through LAN port(s) and then the WAN
port. The purpose is to perform the traffic monitor of the host(s).

Rate

4 / 5 based on 1 vote.

Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top