Vigor2860 Series User’s Guide
8
1.2.3 For Vigor2860Vac / Vigor2860Vn-plus
LED
Status
Explanation
Blinking
The router is powered on and running normally.
ACT (Activity)
Off
The router is powered off.
On
Internet connection is ready.
Off
Internet connection is not ready.
WAN2
Blinking
The data is transmitting.
On
A PSTN phone call comes (in and out). However,
when the phone call is disconnected, the LED will be
off.
Line
Off
There is no PSTN phone call.
On
USB device is connected and ready for use.
USB
Blinking
The data is transmitting.
On
The router is ready to access Internet through DSL link.
DSL
Blinking
Slowly: The DSL connection is ready.
Quickly: The connection is training.
On
The phone connected to this port is off-hook.
Off
The phone connected to this port is on-hook.
Phone1/Phone2
Blinking
A phone call comes.
On
Wireless access point with bandwidth of 2.4GHz/5GHz
is ready.
2.4G/5G
Blinking
It will blink slowly while wireless traffic goes through.
ACT and WLAN LEDs blink quickly and
simultaneously when WPS is working, and will return
to normal condition after two minutes. (You need to
setup WPS within 2 minutes.)
LED on Connector
On
The port is connected.
Off
The port is disconnected.
Left
LED
Blinking
The data is transmitting.
On
The port is connected with 1000Mbps.
WAN2
(Giga)
Right
LED
Off
The port is connected with 10/100Mbps
On
The port is connected.
Off
The port is disconnected.
Left
LED
Blinking
The data is transmitting.
On
The port is connected with 1000Mbps.
GigaLAN
1~6
Right
LED
Off
The port is connected with 10/100Mbps
19216811.live