Page 216 / 241
Scroll up to view Page 211 - 215
Vigor2130 Series User’s Guide
208
2.
Install the Router Tools in the
Utility
within provided CD. After installation, click on the
Router Tools>>Syslog
from program menu.
3.
From the Syslog screen, select the router you want to monitor. Be reminded that in
Network Information
, select the network adapter used to connect to the router.
Otherwise, you won’t succeed in retrieving information from the router.
Page 217 / 241
Vigor2130 Series User’s Guide
209
4.12.7 Time and Date
It allows you to specify where the time of the router should be inquired from.
Current System Time
Click
Inquire Time
to get the current time.
Time Zone
Select the time zone where the router is located.
Add NTP server
Click the button to add a new NTP server.
Delete
Click this button to remove an NTP server.
Click
OK
to save these settings.
Page 218 / 241
Vigor2130 Series User’s Guide
210
4.12.8 Management
This page allows you to manage the settings for access control, access list, port setup, and
SMP setup. For example, as to management access control, the port number is used to
send/receive SIP message for building a session. The default value is 5060 and this must
match with the peer Registrar when making VoIP calls.
Enable
HTTP/HTTPS/SSH/ICMP
Ping/FTP/TELNET
Enable the checkbox to allow system administrators to
login from the Internet. There are several servers
provided by the system to allow you managing the router
from Internet. Check the box(es) to specify.
Enable SNMP
Check it to enable such service.
Manager Host IP
– Set one host as the manager to
execute SNMP function. Type the IP address to specify
the certain host.
Access List
You could specify that the system administrator can only
login from a specific host or network defined in the list. A
maximum of three IPs/subnet masks is allowed.
List IP
- Indicate an IP address allowed to login to the
router.
Subnet Mask -
Represent a subnet mask allowed to login to
the router.
Page 219 / 241
Vigor2130 Series User’s Guide
211
4.12.9 Reboot System
The Web Configurator may be used to restart your router for using current configuration.
Click
Reboot System
from
System Maintenance
to open the following page.
Click
OK
. The router will take 5 seconds to reboot the system.
Note:
When the system pops up Reboot System web page after you configure web settings,
please click
OK
to reboot your router for ensuring normal operation and preventing
unexpected errors of the router in the future.
4.12.10 Firmware Upgrade
Before upgrading your router firmware, you need to install the Router Tools. The
Firmware
Upgrade Utility
is included in the tools. The following web page will guide you to upgrade
firmware by using an example. Note that this example is running over Windows OS
(Operating System).
Download the newest firmware from DrayTek's web site or FTP site. The DrayTek web site is
www.draytek.com (or local DrayTek's web site) and FTP site is ftp.draytek.com.
Click
Maintenance>> Firmware Upgrade
to launch the Firmware Upgrade Utility.
Click
Browse..
to locate the newest firmware and click
Upgrade
. During the process of
upgrade, do not turn off your router.
Page 220 / 241
Vigor2130 Series User’s Guide
212
4.13 Diagnostics
Diagnostic Tools provide a useful way to
view
or
diagnose
the status of your Vigor router.
Below shows the menu items for Diagnostics.
4.13.1 Ping
Click
Diagnostics
and click
Ping
to open the web page. It is used to troubleshoot IP
connection for your router.
IP Address
Type in the IP address of the Host/IP that you want to ping.
Ping Size
Type in the payload size of the ICMP packet. Values range from 8
bytes to 1400 bytes.
Start
Click this button to start the ping work. The result will be displayed
on the screen.
19216811.live