Page 226 / 241
Scroll up to view Page 221 - 225
Vigor2130 Series User’s Guide
218
Type
Indicate whether the entry is a static or dynamic entry.
VLAN
Display the VLAN ID of that entry.
MAC Address
Display the MAC address of that entry.
Port Members
Display the port of that entry.
Auto-refresh
Check it to enable auto-refresh function.
Refresh
Click it to reload the page.
Clear
Click it to clear the whole table.
Page 227 / 241
Vigor2130 Series User’s Guide
219
4.13.7 DHCP Table
The facility provides information on IP address assignments. This information is helpful in
diagnosing network problems, such as IP address conflicts, etc.
Click
Diagnostics
and click
DHCP Table
to open the web page.
Computer Name
It displays the name of the computer accepted the assigned
IP address by this router.
IP Address
It displays the IP address assigned by this router for
specified PC.
MAC Address
It displays the MAC address for the specified PC that
DHCP assigned IP address for it.
Expire Time
It displays the leased time of the specified PC.
Auto-refresh
Check it to enable auto-refresh function.
Refresh
Click it to reload the page.
Page 228 / 241
Vigor2130 Series User’s Guide
220
4.13.8 Data Flow Monitor
This page displays the running procedure for the IP address monitored and refreshes the data
in an interval of several seconds. The IP address listed here is configured in Bandwidth
Management. You have to enable IP bandwidth limit and IP session limit before invoke Data
Flow Monitor. If not, a notification dialog box will appear to remind you enabling it.
Click
Diagnostics
and click
Data Flow Monitor
to
open the web page. You can click
IP
Address
,
TX rate
,
RX rate
or
Session
link for arranging the data display.
Auto-refresh
Check it to enable auto-refresh function.
Refresh
Click this link to refresh this page manually.
Index
Display the number of the data flow.
IP Address
Display the IP address of the monitored device.
TX rate (kbps)
Display the transmission speed of the monitored device.
RX rate (kbps)
Display the receiving speed of the monitored device.
Hardware NAT rate
Display
the data processing rate of the monitored device if
hardware NAT is enabled.
Sessions
Display the session number that you specified in Limit
Session web page.
Action
Block
- can prevent specified PC accessing into Internet
within 5 minutes.
Unblock
– the device with the IP address will be blocked
Page 229 / 241
Vigor2130 Series User’s Guide
221
in five minutes. The remaining time will be shown on the
session column.
4.13.9 Ports State
Click
Diagnostics
and click
Ports State
to open the list page. There are for LAN ports and
one WAN port in your router. Through this page, you can know which port is using and you
can get the detailed statistics for each port by moving and clicking the mouse on the connected
one.
Auto-refresh
Check it to enable auto-refresh function.
Refresh
Click it to reload the page if you change the LAN port
connection. Or you can check Auto-refresh to reload the
page by the system automatically.
Page 230 / 241
Vigor2130 Series User’s Guide
222
This page is left blank.
19216811.live