Page 231 / 241
Scroll up to view Page 226 - 230
Vigor2130 Series User’s Guide
223
5
T
T
r
r
o
o
u
u
b
b
l
l
e
e
S
S
h
h
o
o
o
o
t
t
i
i
n
n
g
g
This section will guide you to solve abnormal situations if you cannot access into the Internet
after installing the router and finishing the web configuration. Please follow sections below to
check your basic installation status stage by stage.
z
Checking if the hardware status is OK or not.
z
Checking if the network connection settings on your computer are OK or not.
z
Pinging the router from your computer.
z
Checking if the ISP settings are OK or not.
z
Backing to factory default setting if necessary.
If all above stages are done and the router still cannot run normally, it is the time for you to
contact your dealer for advanced help.
5.1 Checking If the Hardware Status Is OK or Not
Follow the steps below to verify the hardware status.
1.
Check the power line and WLAN/LAN cable connections.
Refer to “
1.3 Hardware Installation”
for details.
2.
Turn on the router. Make sure the
ACT LED
blink once per second and the
correspondent
LAN LED
is bright.
3.
If not, it means that there is something wrong with the hardware status. Simply back to
“1.3 Hardware Installation”
to execute the hardware installation again. And then, try
again.
Page 232 / 241
Vigor2130 Series User’s Guide
224
5.2 Checking If the Network Connection Settings on Your
Computer Is OK or Not
Sometimes the link failure occurs due to the wrong network connection settings. After trying
the above section, if the link is stilled failed, please do the steps listed below to make sure the
network connection settings is OK.
For Windows
±
The example is based on Windows XP. As to the examples for other operation
systems, please refer to the similar steps or find support notes in
www.draytek.com
.
1.
Go to
Control Panel
and then double-click on
Network Connections
.
2.
Right-click on
Local Area Connection
and click on
Properties
.
3.
Select
Internet Protocol (TCP/IP)
and then click
Properties
.
Page 233 / 241
Vigor2130 Series User’s Guide
225
4.
Select
Obtain an IP address automatically
and
Obtain DNS server address
automatically
.
For MacOs
1.
Double click on the current used MacOs on the desktop.
2.
Open the
Application
folder and get into
Network
.
3.
On the
Network
screen, select
Using DHCP
from the drop down list of Configure IPv4.
Page 234 / 241
Vigor2130 Series User’s Guide
226
5.3 Pinging the Router from Your Computer
The default gateway IP address of the router is
192.168.1.1. For some reason, you might need
to use “ping” command to check the link status of the router.
The most important thing is
that the computer will receive a reply from
192.168.1.1.
If not, please check the IP address
of your computer. We suggest you setting the network connection as
get IP automatically
.
(Please refer to the section 5.2)
Please follow the steps below to ping the router correctly.
For Windows
1.
Open the
Command
Prompt window (from
Start menu> Run
).
2.
Type
command
(for Windows 95/98/ME) or
cmd
(for Windows NT/ 2000/XP/Vista).
The DOS command dialog will appear.
3.
Type ping
192.168.1.1 and press [Enter]. If the link is OK, the line of
“Reply from
192.168.1.1:bytes=32 time<1ms TTL=255”
will appear.
4.
If the line does not appear, please check the IP address setting of your computer.
For MacOs (Terminal)
1.
Double click on the current used MacOs on the desktop.
2.
Open the
Application
folder and get into
Utilities
.
3.
Double click
Terminal
. The Terminal window will appear.
4.
Type
and press [Enter]. If the link is OK, the line of
“64 bytes from
192.168.1.1: icmp_seq=0 ttl=255 time=xxxx ms
” will appear.
Page 235 / 241
Vigor2130 Series User’s Guide
227
5.4 Checking If the ISP Settings are OK or Not
Open
WAN>>Internet Access
page and then check whether the ISP settings are set correctly.
Use the Connection Type drop down list to choose Static IP/DHCP/PPPoE/PPTP/L2TP/3G
USB Modem for reviewing the settings that you configured previously.
19216811.live