1. Home
    2. /
  2. Manuals
    3. /
  3. DrayTek
    4. /
  4. Vigor2130n
    5. /
  5. 43
Page 211 / 241 Scroll up to view Page 206 - 210
Vigor2130 Series User’s Guide
203
ACS Settings
Such data must be typed according to the ACS (
Auto
Configuration Server) you want to link. Please refer
to VigorACS user’s manual for detailed information.
URL
- Type the URL for VigorACS server.
If the connected CPE needs to be authenticated, please
set URL as the following and type username and
password for VigorACS server:
http://{IP address of
VigorACS}:8080/ACSServer/services/ACSServlet
If the connected CPE does not need to be authenticated
please set URL as the following:
http://{IP address of
VigorACS}:8080/ACSServer/services/UnAuthACSServ
let
Username/Password
- Type username and password for
ACS Server for authentication. For example, if you want
to use such CPE with VigorACS, you can type as the
following:
Username
: acs
Password
: password
CPE Settings
Such information is useful for Auto Configuration
Server.
Enable/Disable
– Allow/Deny the CPE Client to
connect with Auto Configuration Server.
Port
– Sometimes, port conflict might be occurred.
To solve such problem, you might change port
number for CPE.
Periodic Inform Settings
Disable –
The system will not send inform message to
Page 212 / 241
Vigor2130 Series User’s Guide
204
ACS server.
Enable –
The system will send inform message to ACS
server periodically (with the time set in the box of
interval time).
The default setting is
Enable
. Please set interval time or
schedule time for the router to send notification to CPE.
Or click
Disable
to close the mechanism of notification.
4.12.3 System Password
This page allows you to set new password for admin operation.
Old Password
Type in the old password. The factory default setting for
password is blank.
New Password
Type in new password in this filed.
Confirm Password
Type in the new password again.
When you click OK, the login window will appear. Please use the new password to access into
the web configurator again.
4.12.4 User Password
This page allows you to set new password for user operation.
Old Password
Type in the old password. The factory default setting for
password is blank.
New Password
Type in new password in this filed.
Confirm Password
Type in the new password again.
Page 213 / 241
Vigor2130 Series User’s Guide
205
When you click
OK
, the login window will appear. Please use the new password to access
into the web configurator again.
4.12.5 Configuration Backup
Backup the Configuration
Follow the steps below to backup your configuration.
1.
Go to
System
Maintenance
>>
Configuration Backup
. The following windows will be
popped-up, as shown below.
2.
Type a key arbitrarily for encrypting the file. Keep the key in mind. You will need it
whenever you want to restore such file. Click
Backup
button to get into the following
dialog. Click
Save
button to open another dialog for saving configuration as a file.
3.
In
Save As
dialog, the default filename is
config.cfg
. You could give it another name by
yourself.
Page 214 / 241
Vigor2130 Series User’s Guide
206
4.
Click
Save
button, the configuration will download automatically to your computer as a
file named
config.cfg
.
The above example is using
Windows
platform for demonstrating examples. The
Mac
or
Linux
platform will appear different windows, but the backup function is still available.
Note:
Backup for Certification must be done independently. The Configuration Backup
does not include information of Certificate.
Restore Configuration
1.
Go to
System Maintenance
>>
Configuration Backup
. The following windows will be
popped-up, as shown below.
2.
Click
Browse
button to choose the correct configuration file for uploading to the router.
3.
Click
Restore
button and wait for few seconds, the following picture will tell you that
the restoration procedure is successful.
Note:
If the file you want to restore has been encrypted, you will be asked to type the
encrypted key before clicking
Restore
.
Page 215 / 241
Vigor2130 Series User’s Guide
207
4.12.6 Syslog/Mail Alert
SysLog function is provided for users to monitor router. There is no bother to directly get into
the Web Configurator of the router or borrow debug equipments.
Enable (Syslog Access…)
Check “
Enable
” to activate function of syslog.
Router Name
Assign a name of this device.
Server IP Address
The IP address of the Syslog server.
Destination Port
Assign a port for the Syslog protocol.
Log Level
Choose the severity level for the system log entry.
Enable (Mail Alert…)
Check “
Enable
” to activate function of mail alert.
SMTP Server
The IP address of the SMTP server.
Mail To
Assign a mail address for sending mails out.
Mail From
Assign a path for receiving the mail from outside.
User Name
Type the user name for authentication.
Password
Type the password for authentication.
Enable E-mail Alert
Check the box of User Login to send alert message to the
e-mail box while the router detecting the item(s) you
specify here.
Click
OK
to save these settings.
For viewing the Syslog, please do the following:
1.
Just set your monitor PC’s IP address in the field of Server IP Address

Rate

4 / 5 based on 1 vote.

Popular DrayTek Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top