Page 21 / 44
Scroll up to view Page 16 - 20
21
Release Your DPG-2000W Presentation Session
To release your computer from the
DPG-2000W
, open the DPG-2000W PSM
and click on the “Release a Session” button. The
DPG-2000W
is now reset for
a new session, allowing you to easily switch between presenters.
±
Not Available Screen: The following window will be displayed if your
wireless card is unable to connect to the
DPG-2000W
at this time. You
will need to check your wireless configuration settings.
Click Release.
Using the DPG-2000W
(Continued)
Page 22 / 44
22
Exit the DPG-2000W Presentation Session Manager
The tray icon will disappear from your start menu. After exiting, the
DPG-2000W
software restores your wireless network adapter to its original settings if the
adapter has been automatically configured. If not automatically configured, users
have to manually configure the adapter to its original settings.
Click “Exit” to terminate the DPG-2000W PSM program.
Click Exit.
Using the DPG-2000W
(Continued)
Page 23 / 44
23
Web-Based Administration Utility
Introduction to the Web-Based Administration Utility
Along with the software-based PSM available on the install CD, the
DPG-2000W
also has a Web-Based Utility that allows you to configure other aspects of the
DPG-2000W
, such as:
WARNING
Do not power off or disconnect the
DPG-2000W
unit while modifying
DPG-2000W
settings. Doing so may damage the equipment. The
Web-based utility will automatically reboot the
DPG-2000W
if necessary.
Accessing the Web-Based Administration Utility
Be sure that your wireless adapter is connected to the
DPG-2000W
before
running the administration utility. Please refer to the section titled Using the
DPG-2000W > Using Your Wireless Configuration Utility on pg. 14 for more
information.
±
Change the banner page
±
Change the wireless security/encryption settings of the
DPG-2000W
±
Upgrade the
DPG-2000W
firmware
To access the web-based Administration Utility:
Go to: Start > Programs > D-Link
Air Plus G DPG-2000W Utility >
Administration
to launch the
Administration Utility.
Page 24 / 44
24
Web-Based Administration Utility
(Continued)
Configuring the DPG-2000W Using the Web-Based
Administration Utility
When the Administration Utility is launched, a logon window will appear.
Once the Administration manager starts, the following window will appear. Click
“Launch Admin Web Interface” to launch the Administration Utility.
admin
Page 25 / 44
25
Web-Based Administration Utility
(Continued)
The Default User Name is
admin
and the Password is blank (empty field).
Clicking “OK” will launch the admin webpage.
Settings Page
User Name
You can change the default “Admin” user name in this
field. There is a 16-character limit for this field.
This allows you to change the password of the
DPG-
2000W
. By default, the paswsword is blank (empty field).
It is recommended that you assign a password
immediately to prevent unauthorized users from
accessing the administration utility. There is a 16-
character limit for this field.
Enter New
Password
Confirm New
Password
Confirm the password that you entered in the “Enter New
Password” field.
19216811.live