Page 6 / 44
Scroll up to view Page 1 - 5
6
Connections and LEDs
WARNING
Use only the power supply adapter provided
with this product or the manufacturer’s
authorized replacement power supply.
Using a different power supply may damage
your product and void the warranty.
Front Panel
Rear Panel
Power LED
: Lights solid
green when connected to
a power source.
Wireless LED
: During boot-up this
LED will remain unlit. While waiting
for a connection the LED blinks
amber rapidly. A solid green light
indicates a connection with a PC
has been established.
WARNING
Antenna Connector
: The
802.11g antenna attaches here.
Projector / Monitor
: Connects
to a monitor or projector’s VGA
cable.
Reset button
: Restores
factory default settings.
Power Connector
: The
power adapter attaches here.
Page 7 / 44
7
Installing the DPG-2000W
Safety Statements
Use only the power adapter provided with this product or the manufacturer’s
authorized replacement power supply.
Connect the power adapter to a properly grounded electrical outlet that is near
the product and easily accessible.
Refer service or repairs, other than those described in the user documentation,
to a professional service person.
Hardware Installation
Connect the DPG-2000W to a
monitor or projector
Connect a standard VGA monitor
cable to the 15 pin connector labeled
Projector / Monitor on the rear panel.
Attach the 802.11g Antenna
Attach the 802.11g antenna to the
antenna connector on the rear panel.
Secure the antenna in place by
rotating the knob at the base of the
antenna clockwise. Be sure the
antenna is secure and in an upright
position.
Page 8 / 44
8
Installing the DPG-2000W
(Continued)
Software Installation
Attach the External Power Supply
Attach the external power adapter to
the power connector located on the
rear panel and plug the power adapter
to an AC power outlet.
Insert the
DPG-2000W
CD in to
the CD-ROM drive and the
following screen will appear.
Click on Install DPG-
2000W Software.
The PSM software and the Web-based Administration Utility can be installed on
your computer by following the screens in this section. If you wish to run the
Presentation Session Manager directly from the CD-ROM, click on the
Run
from CD
option.
Page 9 / 44
9
Click Next to begin the
software installation.
Installing the DPG-2000W
(Continued)
Click Next to use the
default destination
folder.
Click Next to proceed
with the Typical install.
19216811.live