Page 16 / 44
Scroll up to view Page 11 - 15
16
Using the DPG-2000W
(Continued)
Click Wireless Networks.
The window below should appear. Displayed is a list of available networks that
are detected. You can also set your wireless card to automatically connect to
the
DPG-2000W
in the Preferred Networks settings. Simply remove the other
preferred networks in the list by selecting them and clicking “remove.”
Page 17 / 44
17
Using the DPG-2000W
(Continued)
A successful connection to the
DPG-2000W
is indicated by the screen shown
below:
Running the DPG-2000W Presentation Session Manager
You have to start the DPG-2000W Presentation Session Manager (PSM) to
control the
DPG-2000W
. There are two ways to run the DPG-2000W PSM.
One is to run the DPG-2000W PSM directly from the utility CD while the other
is to run a locally installed DPG-2000W PSM from a hard-drive.
To run the PSM directly from the utility CD, insert the utility CD into CD-Drive
and click the “Run from CD” button in an auto-start window. If the auto-run
window does not show up automatically, open My Computer and explore on the
CD-Drive where the utility CD is inserted and execute DPG-2000W.exe.
Click on Run PSM from CD.
Page 18 / 44
18
Using the DPG-2000W
(Continued)
When the DGS-2000W PSM starts, you will see the following screen:
To run the locally installed PSM from a hard-drive, start the DPG-2000W PSM
program located under the Programs Folder in the Windows Start menu. You
can also double-click on the
DPG-2000W
shortcut on Windows desktop to
start PSM.
Go to: Start > Programs >
D-Link Air Plus G DPG-
2000W Utility >
DPG-
2000W
to launch the PSM.
Check that you have configured your wireless card correctly and click “OK.”
The main PSM screen will be displayed, and a D-Link icon will appear in your
system tray.
Page 19 / 44
19
Using the DPG-2000W
(Continued)
There are three action buttons in the PSM: “Establish a Session”, “Release the
Session”, and “Exit.” Clicking “Exit” will close the DPG-2000W PSM program.
The functions of three other action buttons are described in the following
sections.
Start or Resume Your DPG-2000W Presentation Session
Once you have successfully configured your wireless card to connect to the
DPG-2000W
, click “
Establish a Session
” to connect to the
DPG-2000W
. There
will be a confirmation window alerting you that your session is on, and your
projector or monitor should now display your Desktop.
Page 20 / 44
20
±
Occupied Screen: The following window will be displayed if another user
is currently connected to the
DPG-2000W
.
Various abnormal conditions, such as RF interference or network time-out,
can cause the communication between the
DPG-2000W
and the PSM to be
interrupted. If an interruption of session is detected, the
DPG-2000W
will
automatically try to reconnect and keep the user in session. If the session is
abnormally terminated, the
DPG-2000W
will return to the banner page and be
reset for a new session. Certain abnormal conditions that cause interruption of
the link may be localized on the current presenter’s computer and/or its wireless
card.
Clicking on “Establish a Session” will result in three possible cases:
Connection Messages
±
Connected Screen: The following window will be displayed if a
successful connection is made.
Using the DPG-2000W
(Continued)
19216811.live