1. Home
    2. /
  2. Manuals
    3. /
  3. D-Link
    4. /
  4. DCS-3110
    5. /
  5. 9
Page 41 / 88 Scroll up to view Page 36 - 40
²1
D-Link DCS-3110 User Manual
Section ² - Configuration
Secondary HTTP
Port:
Access name for
stream1:
Access name for
stream2:
FTP Port:
RTSP Streaming:
Authentication:
Access name for
stream1:
Access name for
stream2:
The default value is 8080.
After you have enabled the
Authentication
, you will need to configure and use the access name to access your video file.
For example,
http://camera ip/video.mjpg
(video.mjpg is the
Access name
, you can modify it here)
The default name is video.mjpg.
The default name is video2.mjpg.
Access name for stream 1 / Access name for stream 2
: The access name is used to differentiate the streaming
source. When using Mozilla Firefox or Netscape to access the Network Camera, and the video mode is set to JPEG,
users will receive continuous JPEG pictures. This technology, known as "server push", allows the Network Camera to
feed live pictures to Mozilla Firefox and Netscape. Use the following command to obtain the JPEG file:
http://<ip address>:<http port>/<access name for stream1 or stream2>
For example, when the access name for stream 1 is set to video.mjpg:
1. Launch Mozilla Firefox or Netscape
2. Type the URL command in the address field. Press Enter.
3. The JPEG image will be displayed in your web browser.
Default port is 21. If you want to change the port number, you will need to specify the port when connecting to the FTP
server. For example,
FTP://68.5.1.81:60
(if you use port 60 for your FTP server)
This setting enables you to connect to a camera by using streaming mobile device(s), such as a mobile phone or PDA.
Select either
Basic
where the password is not encrypted, or
Digest
where the password is encrypted during the transmission
to the web server. After you have enabled the
Authentication
, you will need to configure and use the access name to
access your video file.
RTSP://camera ip/live.sdp
(live.sdp is the default access name, you can modify it here)
The default name is live.sdp.
The default name is live2.sdp.
Page 42 / 88
²±
D-Link DCS-3110 User Manual
Section ² - Configuration
The accessibility of the RTSP streaming for the three authentication modes are listed in the following table.
Quick Time
player
Real Player
VLC media
player
mpegable
Player
pvPlayer
Disable
O
O
O
O
O
Basic
O
O
X
X
X
Digest
O
X
X
X
X
O
indicates that the authentication mode is supported by the RTSP player.
X
indicates that the authentication mode is NOT supported by the RTSP player.
Access name for stream 1 / Access name for stream 2
: The access name is used to differentiate the streaming
source. When using a RTSP player to access the Network Camera, and the video mode is set to MPEG-4, use the
following RTSP URL command to request a transmission of streaming data.
rtsp://<ip address>:<rtsp port>/<access name for stream1 or stream2>
For example, when the access name for stream 1 is set to live.sdp:
1
:
Launch a RTSP player.
2
: Choose
File
>
Open URL
. This opens the URL dialog box.
3
:
Type the URL command in the text box.
For example:
4
:
The live video will be displayed in your player.
Page 43 / 88
²3
D-Link DCS-3110 User Manual
Section ² - Configuration
The port number that you use for RSTP streaming, the default port number is 554.
RTP
(Real Time Protocol)
Port
is used
to streaming audio and video while
RTCP
(Real Time Control Protocol) port is used to monitor QoS of RTP stream.
Note:
RTP video port and RTP audio port must be an “even” number. The numbers of RTCP video port and RTCP audio
port must equal to the numbers of RTP video port and RTP audio port, plus one repetitively.
Default port number is 5556.
Default port number is 5557.
You may choose to enable multicast for your camera audio and video streaming so that your
cameras (sources)
and the
receivers (clients)
can establish the connection to send and receive contents.
An IP Multicast group address is used to send and receive content. Sources use this group address as the destination
address while sending their data packets. Receivers use this group address to inform the network that they are interested
in receiving packets sent to that group.
RTSP port:
RTP port for
video:
RTCP port for
video:
Multicast group
address:
Page 44 / 88
²²
D-Link DCS-3110 User Manual
Section ² - Configuration
For example, if some content is associated with group 239.1.1.1, the source will send data packets destined to 239.1.1.1.
Receivers for that content will inform the network that they are interested in receiving data packets sent to the group
239.1.1.1. The receiver “joins” 239.1.1.1. The Multicast address ranges from 224.0.0.0 to 239.255.255.255, or, equivalently,
224.0.0.0/4
Default port number is 5560, or please choose between 1024 and 65534.
Default port number is 5561, or please choose between 1024 and 65534.
Default port number is 5563, or please choose between 1024 and 65534.
Set a Time to Live(TTL) value for multicast packet, please choose between 1 and 255.
The two way audio port in DSC-3415 is set to 5060, by default. It can also be assigned to another port number between 1025
and 65535. This Network Camera supports two way audio communication so that operators can transmit and receive audio
simultaneously. By using the camera’s built-in microphone and an external speaker, users can communicate with people
present around the Network Camera.
Note:
Since JPEG only transmits a series of JPEG images to the client, to utilize this feature, make sure the video mode is
set to MPEG-4 and the media option is set to Video and Audio.
Multicast video
port:
Multicast RTCP
video port:
Multicast RTCP
audio port:
Multicast TTL
{1~255]:
Two way
audio port:
Unicast video transmission delivers a stream through point-to-point transmission. On the other hand, multicast video
transmission sends a stream to the multicast group address and allows multiple clients to acquire the stream by
requesting a copy from the Multicast group address.
The five ports can be changed between 1025 and 65535. The multicast RTP port must be an even number and the
multicast RTCP port is multicast RTP port number plus one, and thus always be odd. When the multicast RTP port
changes, the multicast RTCP port will change accordingly.
Page 45 / 88
²³
D-Link DCS-3110 User Manual
Section ² - Configuration
Enable DDNS:
Server Name:
Host Name:
Username:
Password:
Status:
Click to enable the DDNS function.
Select your Dynamic DNS provider from the drop
down menu.
Enter the host name of the DDNS server.
Enter your username or e-mail used to connect
to the DDNS
Enter your password used to connect to the DDNS
server.
Displays the current connection status.
Dynamic DNS
DDNS (Dynamic Domain Name Server) will hold a DNS host name and synchronize the public IP address of the modem
when it has been modified. The username and password are required when using the DDNS service.

Rate

3.5 / 5 based on 2 votes.

Popular D-Link Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top