²´

D-Link DCS-3110 User Manual

Section ² - Configuration

Color:

Power line

frequency:

Video

orientation:

White balance:

Brightness:

Overlay title and

time stamp on

video:

Select either for

Color

or

B/W (black and white,

monochrome)

video display.

Select either 50 or 60Hz.

Flip

will vertically rotate the video while

Mirror

will

horizontally rotate the video. You may check both

options if the camera is being installed upside

down.

Choose either

Auto

or

Fix

.

Select the brightness level ranged from -5 to +5.

Select to add a date and time stamp on the video.

Image Setup

You may configure the color, brightness, and orientation settings of the video image. Preview of the image will be shown

in the window of Live Video. Click

Save Settings

to save your changes.

²µ

D-Link DCS-3110 User Manual

Section ² - Configuration

Mode:

Frame Size:

Maximum

frame rate:

Video quality:

Mute:

Internal

microphone

input gain:

Select either

JPEG

or

MPEG4

. In JPEG mode, the

video frames are independent. However, MPEG4

consumes much less network bandwidth than

JPEG.

Select

176x144

,

352x240

, or

640x480

. It is

recommended using 176x144 for mobile viewing

and 640x480 for computer viewing.

1 is the minimum value while 30 is the maximum

value. It is recommended choosing 30 for computer

viewing and 5 for mobile viewing.

This limits the maximum refresh frame rate, which

can be combined with the “

Fixed quality

” to optimize

the bandwidth utilization and video quality. If the User

wants to fix the bandwidth utilization regardless of the

video quality, choose “

Constant bit rate

” and select

the desired bandwidth.

Select this to mute audio.

Select an internal microphone input gain from the

drop-down list.

It is necessary to find the optimum gain that transmits the best audio for listening.

Note:

“dB” stands for decibels, a logarithmic unit of measurement in acoustics . The higher the decibel number, the louder

the sound.

Audio and Video

Settings for two video streams (stream 1 and stream 2) can be configured here. You may configure one setting for

computer display and the other one for mobile display.

²¶

D-Link DCS-3110 User Manual

Section ² - Configuration

Select the external microphone input gain from the list.

AAC (Advanced Audio Coding): A wide band audio coding algorithm that exploits two primary coding strategies to dramatically

reduce the amount of data needed to convey high-quality digital audio. Select a higher bit rate number for better audio

quality.

A standard adapted audio codec by the 3GPP video (3rd Generation Partnership Project).

It is an Adaptive Multi Rate-Narrow

Band (AMRNB) speech codec. Select a higher bit rate number for better audio quality.

Select an AAC bit rate from the list. Higher bit rate means higher audio quality but it takes more network bandwidth to

transmit.

Select the GSM-AMR bit rate from the list. Higher bit rate means higher audio quality but it takes more network bandwidth

to transmit.

External

microphone

input:

Audio type:

GSM-AMR:

AAC bit rate:

GSM-AMR

bit rate:

²·

D-Link DCS-3110 User Manual

Section ² - Configuration

Enable motion

detection:

Window name:

Sensitivity:

Percentage:

New:

Save:

Check this option to turn on the motion detection

feature.

Create your own name for the monitored area/

window. It will show at the top of the motion

window.

Set the measurable difference between two

sequential images that would indicate motion.

Set the amount of motion in the window being

monitored that is required to initiate a motion

detected alert. If this is set to 100%, this means

that motion must be detected within the whole

window to trigger a snapshot.

Note:

Setting a higher sensitivity and a lower

percentage will make motion easier to be

detected.

Click to add a new window. A maximum of three

motion windows can be opened simultaneously.

Use your mouse to drag the window frame to

re-size or the title bar to move. Clicking on the ‘

x

’

at the upper right corner of the window will close

the window.

Save the related settings of that window.

Motion Detection

Enabling Motion Detection will allow up to three windows that can be created with different settings for monitoring. This

allows your camera to serve as a security device that will record when motion is detected.

³0

D-Link DCS-3110 User Manual

Section ² - Configuration

1. Click

New

to add a new motion detection window.

2. Enter a name in the

Window Name

field.

3. Define the sensitivity to moving objects and the space ratio of all alerted pixels by moving the

Sensitivity

and

Percentage

slide bar.

4. Click

Save

to apply the changes.

5. Select

Enable motion detection

to activate motion detection.

Note:

Drag to resize the window and click X to close the window.

The Percentage Indicator will rise or fall depending on the image variation. When motions are detected by the Network

Camera and are judged to exceed the defined threshold, a red bar rises. Meanwhile, the motion detection window will

be outlined in red. Utilizing this device as a trigger source, photos or videos can be captured instantly and sent to the

remote server (Email, FTP).

A green bar indicates that even though motions are detected, the event will not be triggered because the image variations

are still falling under the defined threshold.

Percentage = 30%

To enable motion detection, follow the steps below: